Steppers
Posted by
Gene
on 2004-05-05 14:12:12 UTC
Today I have two questions that I hope someone can help me with. I
wonder if it is ok to use two different step rates on the Z and Y axis?
I have two motors, one is 1.8 degree step and the other is 200 steps.
Would these work together? These are NEMA 34 motors. also I would like
to know if a NEMA 42 motor, 2.3 volt, 6.1 amp, 1.8 step would work with
the other two, all to be used with Gecko G201 10u step drives. Thanks in
advance.
wonder if it is ok to use two different step rates on the Z and Y axis?
I have two motors, one is 1.8 degree step and the other is 200 steps.
Would these work together? These are NEMA 34 motors. also I would like
to know if a NEMA 42 motor, 2.3 volt, 6.1 amp, 1.8 step would work with
the other two, all to be used with Gecko G201 10u step drives. Thanks in
advance.
Discussion Thread
twil62551@a...
1999-07-03 20:35:46 UTC
Steppers
Ian W. Wright
1999-09-03 14:58:01 UTC
Steppers
DRigotti@a...
1999-09-03 19:38:45 UTC
Re: Steppers
Ian W. Wright
1999-09-04 03:19:53 UTC
Re: Steppers
Dan Mauch
1999-09-04 08:41:30 UTC
Re: Steppers
Charles Hopkins
2000-01-19 09:27:15 UTC
Steppers
Les Watts
2000-01-19 11:24:43 UTC
Re: Steppers
Matt Shaver
2000-01-19 12:09:16 UTC
Re: Steppers
Jon Elson
2000-01-19 21:26:52 UTC
Re: Steppers
Charles Hopkins
2000-01-20 09:03:20 UTC
RE: Steppers
Charles Hopkins
2000-01-20 09:34:08 UTC
RE: Steppers
Matt Shaver
2000-01-20 10:26:34 UTC
Re: Steppers
Matt Shaver
2000-01-20 10:28:41 UTC
Re: Steppers
Bob Campbell
2000-01-20 12:46:07 UTC
Re: Steppers
Harrison, Doug
2000-01-20 11:47:00 UTC
RE: Steppers
Gene
2002-03-31 01:01:22 UTC
Steppers
Ron Thompson
2002-03-31 07:01:57 UTC
Re: [CAD_CAM_EDM_DRO] Steppers
Alan Rothenbush
2002-03-31 07:56:31 UTC
Re: Steppers
JanRwl@A...
2002-03-31 13:21:12 UTC
Re: [CAD_CAM_EDM_DRO] Steppers
Alan Marconett KM6VV
2002-03-31 15:32:46 UTC
Re: [CAD_CAM_EDM_DRO] Steppers
andrewyslee
2002-03-31 22:39:49 UTC
Re: Steppers
dave_ace_me
2002-04-01 08:52:38 UTC
Steppers on a shaper (was Re: Steppers
Gene
2002-04-01 09:16:19 UTC
Re: [CAD_CAM_EDM_DRO] Steppers on a shaper (was Re: Steppers
Alan Marconett KM6VV
2002-04-01 13:28:54 UTC
Re: Steppers
Gene
2002-04-04 23:49:26 UTC
Steppers
JanRwl@A...
2002-04-05 12:37:00 UTC
Re: [CAD_CAM_EDM_DRO] Steppers
Tim Goldstein
2002-04-06 21:17:18 UTC
RE: [CAD_CAM_EDM_DRO] Steppers
ballendo
2002-04-13 03:21:53 UTC
Steppers on a shaper (was Re: Steppers
Gene
2002-11-26 01:50:47 UTC
Steppers
caudlet
2002-11-26 08:59:03 UTC
Re: Steppers
Tim Goldstein
2002-11-26 10:40:27 UTC
Re: [CAD_CAM_EDM_DRO] Steppers
Greg Jackson
2002-11-26 18:25:23 UTC
RE: [CAD_CAM_EDM_DRO] Steppers
Tim Goldstein
2002-11-26 22:49:40 UTC
RE: [CAD_CAM_EDM_DRO] Steppers
Gene
2002-12-02 21:06:12 UTC
Steppers
caudlet
2002-12-03 05:41:25 UTC
Re: Steppers
Gene
2004-05-05 14:12:12 UTC
Steppers
Michael Johnston
2004-05-05 14:26:21 UTC
RE: [CAD_CAM_EDM_DRO] Steppers
Jon Elson
2004-05-05 20:25:02 UTC
Re: [CAD_CAM_EDM_DRO] Steppers
JanRwl@A...
2004-05-05 20:56:09 UTC
Re: [CAD_CAM_EDM_DRO] Steppers
Michael Johnston
2004-05-05 21:08:40 UTC
RE: [CAD_CAM_EDM_DRO] Steppers
Nick Ibbitson
2004-05-07 13:13:20 UTC
Re: [CAD_CAM_EDM_DRO] Steppers
Gene
2004-08-17 10:57:09 UTC
Steppers
Jon Elson
2004-08-18 03:13:11 UTC
Re: [CAD_CAM_EDM_DRO] Steppers
krashking405
2006-07-19 15:22:54 UTC
Steppers