CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Steppers

on 2004-05-05 14:26:21 UTC
One revolution has 360 degrees. 360 degrees divided by 200 steps equals 1.8
degrees per step. So, all three motors are actually equivalent in their
rotational accuracy. They just express the measurement differently: 200
steps vs 1.8 degrees means the same thing. The Gecko drive will handle up
to 10 amps so I would think you should be OK.

-----Original Message-----
From: Gene [mailto:capper@...]
Sent: Wednesday, May 05, 2004 2:03 PM
To: DIY-CNC@yahoogroups.com; CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Steppers


Today I have two questions that I hope someone can help me with. I
wonder if it is ok to use two different step rates on the Z and Y axis?
I have two motors, one is 1.8 degree step and the other is 200 steps.
Would these work together? These are NEMA 34 motors. also I would like
to know if a NEMA 42 motor, 2.3 volt, 6.1 amp, 1.8 step would work with
the other two, all to be used with Gecko G201 10u step drives. Thanks in
advance.


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links

Discussion Thread

twil62551@a... 1999-07-03 20:35:46 UTC Steppers Ian W. Wright 1999-09-03 14:58:01 UTC Steppers DRigotti@a... 1999-09-03 19:38:45 UTC Re: Steppers Ian W. Wright 1999-09-04 03:19:53 UTC Re: Steppers Dan Mauch 1999-09-04 08:41:30 UTC Re: Steppers Charles Hopkins 2000-01-19 09:27:15 UTC Steppers Les Watts 2000-01-19 11:24:43 UTC Re: Steppers Matt Shaver 2000-01-19 12:09:16 UTC Re: Steppers Jon Elson 2000-01-19 21:26:52 UTC Re: Steppers Charles Hopkins 2000-01-20 09:03:20 UTC RE: Steppers Charles Hopkins 2000-01-20 09:34:08 UTC RE: Steppers Matt Shaver 2000-01-20 10:26:34 UTC Re: Steppers Matt Shaver 2000-01-20 10:28:41 UTC Re: Steppers Bob Campbell 2000-01-20 12:46:07 UTC Re: Steppers Harrison, Doug 2000-01-20 11:47:00 UTC RE: Steppers Gene 2002-03-31 01:01:22 UTC Steppers Ron Thompson 2002-03-31 07:01:57 UTC Re: [CAD_CAM_EDM_DRO] Steppers Alan Rothenbush 2002-03-31 07:56:31 UTC Re: Steppers JanRwl@A... 2002-03-31 13:21:12 UTC Re: [CAD_CAM_EDM_DRO] Steppers Alan Marconett KM6VV 2002-03-31 15:32:46 UTC Re: [CAD_CAM_EDM_DRO] Steppers andrewyslee 2002-03-31 22:39:49 UTC Re: Steppers dave_ace_me 2002-04-01 08:52:38 UTC Steppers on a shaper (was Re: Steppers Gene 2002-04-01 09:16:19 UTC Re: [CAD_CAM_EDM_DRO] Steppers on a shaper (was Re: Steppers Alan Marconett KM6VV 2002-04-01 13:28:54 UTC Re: Steppers Gene 2002-04-04 23:49:26 UTC Steppers JanRwl@A... 2002-04-05 12:37:00 UTC Re: [CAD_CAM_EDM_DRO] Steppers Tim Goldstein 2002-04-06 21:17:18 UTC RE: [CAD_CAM_EDM_DRO] Steppers ballendo 2002-04-13 03:21:53 UTC Steppers on a shaper (was Re: Steppers Gene 2002-11-26 01:50:47 UTC Steppers caudlet 2002-11-26 08:59:03 UTC Re: Steppers Tim Goldstein 2002-11-26 10:40:27 UTC Re: [CAD_CAM_EDM_DRO] Steppers Greg Jackson 2002-11-26 18:25:23 UTC RE: [CAD_CAM_EDM_DRO] Steppers Tim Goldstein 2002-11-26 22:49:40 UTC RE: [CAD_CAM_EDM_DRO] Steppers Gene 2002-12-02 21:06:12 UTC Steppers caudlet 2002-12-03 05:41:25 UTC Re: Steppers Gene 2004-05-05 14:12:12 UTC Steppers Michael Johnston 2004-05-05 14:26:21 UTC RE: [CAD_CAM_EDM_DRO] Steppers Jon Elson 2004-05-05 20:25:02 UTC Re: [CAD_CAM_EDM_DRO] Steppers JanRwl@A... 2004-05-05 20:56:09 UTC Re: [CAD_CAM_EDM_DRO] Steppers Michael Johnston 2004-05-05 21:08:40 UTC RE: [CAD_CAM_EDM_DRO] Steppers Nick Ibbitson 2004-05-07 13:13:20 UTC Re: [CAD_CAM_EDM_DRO] Steppers Gene 2004-08-17 10:57:09 UTC Steppers Jon Elson 2004-08-18 03:13:11 UTC Re: [CAD_CAM_EDM_DRO] Steppers krashking405 2006-07-19 15:22:54 UTC Steppers