Re: [CAD_CAM_EDM_DRO] Steppers

----- Original Message -----
From: "Gene" <capper@...>
To: <DIY-CNC@yahoogroups.com>; <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, May 05, 2004 10:03 PM
Subject: [CAD_CAM_EDM_DRO] Steppers


> Today I have two questions that I hope someone can help me with. I
> wonder if it is ok to use two different step rates on the Z and Y axis?
> I have two motors, one is 1.8 degree step and the other is 200 steps.
> Would these work together? These are NEMA 34 motors. also I would like
> to know if a NEMA 42 motor, 2.3 volt, 6.1 amp, 1.8 step would work with
> the other two, all to be used with Gecko G201 10u step drives. Thanks in
> advance.
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>