Re: [CAD_CAM_EDM_DRO] Coolant on a little desktop mill (ie a Sherline)
Posted by
Aaron
on 2004-07-19 14:19:57 UTC
...or a small fish pond pump will do the job
----- Original Message -----
From: <GLM590620@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, July 19, 2004 9:26 AM
Subject: Re: [CAD_CAM_EDM_DRO] Coolant on a little desktop mill (ie a
Sherline)
> Abby
>
> Some types of car washer pump are a no no, well they will not last very
long
> anyway, the reason being is that one type is a gear pump and the other one
> that i have seen is fitted with a small rubber impeller, and both will
wear out
> pretty rapidly with all the swarf in the coolant, the one you want is a
> centrifugal type pump, there is a washer motor like this and the one that
i used on a
> job years ago, came off a renault car, but the best one i have found and
> which i use on both my mill and lathe is a caravan pump, this is a little
12v
> sealed submersible pump, you will need either a speed controller or a tap
to
> control the flow.
>
> Gavin
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
Discussion Thread
Bill Vance
2004-07-16 02:31:09 UTC
Encoder/Servo question
Leslie Watts
2004-07-16 05:29:38 UTC
RE: [CAD_CAM_EDM_DRO] Encoder/Servo question
Joe Hlebasko
2004-07-16 05:34:15 UTC
RE: [CAD_CAM_EDM_DRO] Encoder/Servo question
Jon Elson
2004-07-16 09:05:23 UTC
Re: [CAD_CAM_EDM_DRO] Encoder/Servo question
Gregory Kamysz
2004-07-16 13:54:00 UTC
Milling table
jrunyan02
2004-07-16 14:53:52 UTC
Re: Milling table
AbbyKatt
2004-07-16 15:04:33 UTC
Coolant on a little desktop mill (ie a Sherline)
Bill Vance
2004-07-16 15:08:08 UTC
Re: [CAD_CAM_EDM_DRO] Encoder/Servo question
Leslie Watts
2004-07-16 16:30:24 UTC
RE: [CAD_CAM_EDM_DRO] Encoder/Servo question
Svenne
2004-07-16 17:36:45 UTC
Re: [CAD_CAM_EDM_DRO] Coolant on a little desktop mill (ie a Sherline)
JanRwl@A...
2004-07-16 17:38:34 UTC
Re: [CAD_CAM_EDM_DRO] Coolant on a little desktop mill (ie a Sherline)
Bill Vance
2004-07-16 21:19:42 UTC
Re: [CAD_CAM_EDM_DRO] Encoder/Servo question
Jon Elson
2004-07-16 21:25:52 UTC
Re: [CAD_CAM_EDM_DRO] Encoder/Servo question
Jon Elson
2004-07-16 21:37:11 UTC
Re: [CAD_CAM_EDM_DRO] Coolant on a little desktop mill (ie a Sherline)
Leslie Watts
2004-07-17 03:40:43 UTC
RE: [CAD_CAM_EDM_DRO] Encoder/Servo question
Bill Vance
2004-07-17 05:50:51 UTC
Re: [CAD_CAM_EDM_DRO] Encoder/Servo question
Felice Luftschein and Nicholas Carter
2004-07-17 09:47:21 UTC
Re: Coolant on a little desktop mill (ie a Sherline)
Bob McKnight
2004-07-18 17:40:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Milling table
GLM590620@A...
2004-07-19 01:26:24 UTC
Re: [CAD_CAM_EDM_DRO] Coolant on a little desktop mill (ie a Sherline)
Aaron
2004-07-19 14:19:57 UTC
Re: [CAD_CAM_EDM_DRO] Coolant on a little desktop mill (ie a Sherline)