CAD CAM EDM DRO - Yahoo Group Archive

Re: Gecko Bridgeport saga - Gib adjustment?

Posted by Keith Clark
on 2004-09-04 16:26:23 UTC
Do I put 5 volts to the dir input and then use a switch to turn it
off to get direction? I will use the simple tape measure idea,
thanks to both of you. I a similar type to what is recommended
according to the oil company.

Thanks
Keith

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "vavaroutsos" <pete@v...>
wrote:
> Keith, it should also be a simple matter to connect a swith to the
> direction line of the gecko so you can change direction without re-
> wiring the motor.
>
> I would check all of the lube flow orfices as they may be clogged.
> Are you getting any lube on the ways when you cycle the pump? Does
> your machine have the original automatic Bijur lube unit on it?
What
> kind of lube did you put in it?
>
> ~petev
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, Ron K <godsone@e...> wrote:
> >
> >
> > Keith Clark wrote:
> >
> > >~petev,
> > >
> > >I can't measure how fast the axis moves with the external pulse
> > >generator since the computer will not work at the same time.
> > >
> >
> > Lay a tape measure on the table , or just make a mark every 10
> inches
> > and see how long it takes to move 20"
> > Basic science .
> >
> >
> >
> > --
> > Ron Kline
> >
> > American Precision Ceramics

Discussion Thread

Keith Clark 2004-09-04 05:51:37 UTC Gecko Bridgeport saga continues Andy Wander 2004-09-04 07:14:54 UTC RE: [CAD_CAM_EDM_DRO] Gecko Bridgeport saga continues Keith Clark 2004-09-04 11:11:09 UTC Re: Gecko Bridgeport saga improving Andy Wander 2004-09-04 11:18:53 UTC RE: [CAD_CAM_EDM_DRO] Re: Gecko Bridgeport saga improving vavaroutsos 2004-09-04 11:58:02 UTC Re: Gecko Bridgeport saga improving Keith Clark 2004-09-04 13:15:26 UTC Re: Gecko Bridgeport saga - Gib adjustment? Ron K 2004-09-04 13:24:34 UTC Re: [CAD_CAM_EDM_DRO] Re: Gecko Bridgeport saga - Gib adjustment? vavaroutsos 2004-09-04 15:04:50 UTC Re: Gecko Bridgeport saga - Gib adjustment? Keith Clark 2004-09-04 16:26:23 UTC Re: Gecko Bridgeport saga - Gib adjustment? Raymond Heckert 2004-09-04 19:07:49 UTC Re: [CAD_CAM_EDM_DRO] Re: Gecko Bridgeport saga improving Stephen Wille Padnos 2004-09-04 19:08:01 UTC Re: [CAD_CAM_EDM_DRO] Re: Gecko Bridgeport saga - Gib adjustment? Keith Clark 2004-09-04 19:26:37 UTC Re: Gecko Bridgeport saga improving Keith Clark 2004-09-04 19:31:10 UTC Re: Gecko Bridgeport saga - Gib adjustment? Stephen Wille Padnos 2004-09-04 19:54:59 UTC Re: [CAD_CAM_EDM_DRO] Re: Gecko Bridgeport saga - Gib adjustment? Jon Elson 2004-09-04 20:46:51 UTC Re: [CAD_CAM_EDM_DRO] Re: Gecko Bridgeport saga - Gib adjustment? Keith Clark 2004-09-05 05:17:55 UTC Re: Gecko Bridgeport saga - Gib adjustment? Keith Clark 2004-09-05 05:26:56 UTC Re: Gecko Bridgeport saga - Gib adjustment? vavaroutsos 2004-09-05 09:31:45 UTC Re: Gecko Bridgeport saga - Gib adjustment? Keith Clark 2004-09-05 16:02:16 UTC Re: Gecko Bridgeport saga - Gib adjustment?