Re: Gecko Bridgeport saga improving

I could put another relay in that runs the switch for the lube
system while the spindle is powered as I did for the brake
solenoid. Thanks for the idea. I was thinking this afternoon that
I need to check into whether the lube system was even powered now.

Thanks
Keith

--- In CAD_CAM_EDM_DRO@yahoogroups.com, Raymond Heckert <jnr@a...>
wrote:

> Congratulations! Just one caveat: I think that you have to be

running

> the spindle motor if you're gonna be using the power lube system as
> they're on the same relay... at least, that's how one of my

machines

> (the SHARNOA) is wired. The power lube only works when the spindle

is

> running.
>
> RayHex
>
> Keith Clark wrote:
> >
> <snip>
> >
> > That sounds fantastic, but then when I try to run the machine,it
> > stalls again. Looks like the axes are not oiled well so I am
> > running a program to run the axes back and forth while actuating

the

> > lubricating system. It looks like I have the potential to go 75
> <snip>