CAD CAM EDM DRO - Yahoo Group Archive

Re: plasma accuracy

on 2004-12-17 15:22:18 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Graham Stabler" <eexgs@n...>
wrote:
>
> Ignoreing the machine for a moment and the possible warping of the
> metal, what is the usual kerf width for a plasma machine?
>
> Has anyone considered trying to make a tiny plasma torch for
cutting
> shim etc?
>
> Graham

There is a guy who made his own power supply for a a little over $100
bux.

I hear that a standard machine can do 20 to 45 thou as a standard
kerf and the Hypertherm fine cut can do less than 10 thou.

If one was to cut lots of shim, say for production, I would look
seriously at a low power laser.

Dave

Discussion Thread

sargossa_99 2004-12-17 06:58:00 UTC plasma accuracy turbulatordude 2004-12-17 11:19:50 UTC Re: plasma accuracy Graham Stabler 2004-12-17 13:35:47 UTC Re: plasma accuracy V FONG 2004-12-17 14:33:45 UTC Re: [CAD_CAM_EDM_DRO] Re: plasma accuracy turbulatordude 2004-12-17 15:22:18 UTC Re: plasma accuracy Graham Stabler 2004-12-17 15:50:52 UTC Re: plasma accuracy John Heritage 2004-12-18 07:30:52 UTC Re: [CAD_CAM_EDM_DRO] Re: plasma accuracy Graham Stabler 2004-12-18 08:35:04 UTC Re: plasma accuracy caudlet 2004-12-18 08:35:55 UTC Re: plasma accuracy Graham Stabler 2004-12-18 09:12:58 UTC Re: plasma accuracy R Rogers 2004-12-18 09:38:47 UTC Re: [CAD_CAM_EDM_DRO] Re: plasma accuracy turbulatordude 2004-12-18 10:46:15 UTC Re: plasma accuracy caudlet 2004-12-18 13:55:31 UTC Re: plasma accuracy metlmunchr 2004-12-18 15:14:59 UTC Re: plasma accuracy Hal Eckhart 2004-12-18 15:42:28 UTC gecko 201/210 opinions Raymond Heckert 2004-12-18 17:24:32 UTC Re: [CAD_CAM_EDM_DRO] plasma accuracy Raymond Heckert 2004-12-18 17:24:33 UTC Re: [CAD_CAM_EDM_DRO] Re: plasma accuracy caudlet 2004-12-18 17:39:34 UTC Re: gecko 201/210 opinions Hal Eckhart 2004-12-18 18:31:52 UTC Re: [CAD_CAM_EDM_DRO] Re: gecko 201/210 opinions Hal Eckhart 2004-12-18 18:53:42 UTC Re: [CAD_CAM_EDM_DRO] plasma accuracy Jon Elson 2004-12-18 20:40:43 UTC Re: [CAD_CAM_EDM_DRO] gecko 201/210 opinions turbulatordude 2004-12-18 21:40:12 UTC Re: plasma accuracy Randy Brown 2004-12-19 08:03:26 UTC RE: [CAD_CAM_EDM_DRO] Re: plasma accuracy caudlet 2004-12-19 13:12:59 UTC Re: gecko 201/210 opinions m0nkey0ne 2004-12-20 16:22:25 UTC Re: plasma accuracy R Rogers 2004-12-20 17:40:36 UTC Re: [CAD_CAM_EDM_DRO] Re: plasma accuracy turbulatordude 2004-12-20 23:26:48 UTC Re: plasma accuracy Randy Wilson 2004-12-21 05:42:05 UTC Re: [CAD_CAM_EDM_DRO] Re: plasma accuracy Bruce Pigeon 2004-12-21 09:40:37 UTC Re: [CAD_CAM_EDM_DRO] Re: plasma accuracy turbulatordude 2004-12-21 09:46:24 UTC Re: plasma accuracy