CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: plasma accuracy

on 2004-12-18 17:24:33 UTC
It depends on the orifice size of tip you use, the air
pressure used, the speed of the cut, the Amperage setting,
the material being cut, and the thickness thereof. My ESAB
uses two different sizes of tips, and can crank out up to
60 amps continuously... 7/8" mild steel. I can cut 14 ga
hrs at about 150 I.P.M., and 3/16" at about 40 I.P.M. I
could probably get 25% better speeds if/when I CNC it.

RayHex

----------
> From: Graham Stabler <eexgs@...>
>
>
> Ignoreing the machine for a moment and the possible
warping of the
> metal, what is the usual kerf width for a plasma machine?
>
> Has anyone considered trying to make a tiny plasma torch
for cutting
> shim etc?

Discussion Thread

sargossa_99 2004-12-17 06:58:00 UTC plasma accuracy turbulatordude 2004-12-17 11:19:50 UTC Re: plasma accuracy Graham Stabler 2004-12-17 13:35:47 UTC Re: plasma accuracy V FONG 2004-12-17 14:33:45 UTC Re: [CAD_CAM_EDM_DRO] Re: plasma accuracy turbulatordude 2004-12-17 15:22:18 UTC Re: plasma accuracy Graham Stabler 2004-12-17 15:50:52 UTC Re: plasma accuracy John Heritage 2004-12-18 07:30:52 UTC Re: [CAD_CAM_EDM_DRO] Re: plasma accuracy Graham Stabler 2004-12-18 08:35:04 UTC Re: plasma accuracy caudlet 2004-12-18 08:35:55 UTC Re: plasma accuracy Graham Stabler 2004-12-18 09:12:58 UTC Re: plasma accuracy R Rogers 2004-12-18 09:38:47 UTC Re: [CAD_CAM_EDM_DRO] Re: plasma accuracy turbulatordude 2004-12-18 10:46:15 UTC Re: plasma accuracy caudlet 2004-12-18 13:55:31 UTC Re: plasma accuracy metlmunchr 2004-12-18 15:14:59 UTC Re: plasma accuracy Hal Eckhart 2004-12-18 15:42:28 UTC gecko 201/210 opinions Raymond Heckert 2004-12-18 17:24:32 UTC Re: [CAD_CAM_EDM_DRO] plasma accuracy Raymond Heckert 2004-12-18 17:24:33 UTC Re: [CAD_CAM_EDM_DRO] Re: plasma accuracy caudlet 2004-12-18 17:39:34 UTC Re: gecko 201/210 opinions Hal Eckhart 2004-12-18 18:31:52 UTC Re: [CAD_CAM_EDM_DRO] Re: gecko 201/210 opinions Hal Eckhart 2004-12-18 18:53:42 UTC Re: [CAD_CAM_EDM_DRO] plasma accuracy Jon Elson 2004-12-18 20:40:43 UTC Re: [CAD_CAM_EDM_DRO] gecko 201/210 opinions turbulatordude 2004-12-18 21:40:12 UTC Re: plasma accuracy Randy Brown 2004-12-19 08:03:26 UTC RE: [CAD_CAM_EDM_DRO] Re: plasma accuracy caudlet 2004-12-19 13:12:59 UTC Re: gecko 201/210 opinions m0nkey0ne 2004-12-20 16:22:25 UTC Re: plasma accuracy R Rogers 2004-12-20 17:40:36 UTC Re: [CAD_CAM_EDM_DRO] Re: plasma accuracy turbulatordude 2004-12-20 23:26:48 UTC Re: plasma accuracy Randy Wilson 2004-12-21 05:42:05 UTC Re: [CAD_CAM_EDM_DRO] Re: plasma accuracy Bruce Pigeon 2004-12-21 09:40:37 UTC Re: [CAD_CAM_EDM_DRO] Re: plasma accuracy turbulatordude 2004-12-21 09:46:24 UTC Re: plasma accuracy