Re: plasma accuracy

> There is a guy who made his own power supply for a a little over

$100

> bux.
>
> I hear that a standard machine can do 20 to 45 thou as a standard
> kerf and the Hypertherm fine cut can do less than 10 thou.
>
> If one was to cut lots of shim, say for production, I would look
> seriously at a low power laser.
>
> Dave

I would be interested in hearing about that guy. I have a 50W C02
laser but micro plasma seems a cool idea to me and very homebrewable
in comparison.

Graham