CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Minimum reasonable computer speed?

on 2005-01-28 06:30:05 UTC
Tried EMC? It's not as polished as Mach but does everything a CNC
control program ought to, and it's free :)

As for a decent Linux CAD program... anyone have any suggestions? I'd
really love to get one.

Richard

On Fri, 2005-01-28 at 14:22, Ron Ginger wrote:
> I use an old 333mhz pc with 196mb running Win2000 and Mach2 on my Prazi
> mill. It runs fast enough for than machine. I Use a 750mhz on my CNC
> router, and that is limited to about 65 in/min rapids, but it has servos
> and ratios that take 32,000 pulses per inch. It does run reliabily with
> Mach set for the 35K pulse rate.
>
> I sure wish Mach ran under Linux, and that I had a good CAD and CAM
> suite, Id love to not have any microsoft product in the house. In
> particular, note the new Microsoft policy to take effect in the next few
> months that will require proof of orign to get service updates. See
> http://apnews.myway.com/article/20050126/D87RIG600.html for details.
>
> ron ginger
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>

Discussion Thread

Codesuidae 2005-01-27 15:25:12 UTC Minimum reasonable computer speed? Robert Campbell 2005-01-27 15:48:50 UTC Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed? R Rogers 2005-01-27 15:53:24 UTC Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed? Roy J. Tellason 2005-01-27 16:47:07 UTC Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed? Stephen Wille Padnos 2005-01-27 16:51:36 UTC Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed? R Rogers 2005-01-27 17:46:00 UTC Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed? Robert Campbell 2005-01-27 18:14:20 UTC Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed? Scott L Golden 2005-01-27 18:37:46 UTC Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed? turbulatordude 2005-01-27 18:40:23 UTC Re: Minimum reasonable computer speed? codeSuidae 2005-01-27 21:52:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Minimum reasonable computer speed? JanRwl@A... 2005-01-27 23:01:36 UTC Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed? Torsten 2005-01-27 23:50:22 UTC Re: Minimum reasonable computer speed? Ron Ginger 2005-01-28 06:20:17 UTC Re: Minimum reasonable computer speed? Richard Garnish 2005-01-28 06:30:05 UTC Re: [CAD_CAM_EDM_DRO] Re: Minimum reasonable computer speed? cnc_4_me 2005-01-28 06:59:15 UTC Re: Minimum reasonable computer speed? R Rogers 2005-01-28 07:11:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Minimum reasonable computer speed? turbulatordude 2005-01-28 07:24:04 UTC Re: Minimum reasonable computer speed? Fred Smith 2005-01-28 10:13:37 UTC Re: Minimum reasonable computer speed? Alan Marconett 2005-01-28 11:00:48 UTC Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed? JanRwl@A... 2005-01-28 22:25:37 UTC Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed? David A. Frantz 2005-01-29 08:18:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Minimum reasonable computer speed?