Re: Minimum reasonable computer speed?
Posted by
Ron Ginger
on 2005-01-28 06:20:17 UTC
I use an old 333mhz pc with 196mb running Win2000 and Mach2 on my Prazi
mill. It runs fast enough for than machine. I Use a 750mhz on my CNC
router, and that is limited to about 65 in/min rapids, but it has servos
and ratios that take 32,000 pulses per inch. It does run reliabily with
Mach set for the 35K pulse rate.
I sure wish Mach ran under Linux, and that I had a good CAD and CAM
suite, Id love to not have any microsoft product in the house. In
particular, note the new Microsoft policy to take effect in the next few
months that will require proof of orign to get service updates. See
http://apnews.myway.com/article/20050126/D87RIG600.html for details.
ron ginger
mill. It runs fast enough for than machine. I Use a 750mhz on my CNC
router, and that is limited to about 65 in/min rapids, but it has servos
and ratios that take 32,000 pulses per inch. It does run reliabily with
Mach set for the 35K pulse rate.
I sure wish Mach ran under Linux, and that I had a good CAD and CAM
suite, Id love to not have any microsoft product in the house. In
particular, note the new Microsoft policy to take effect in the next few
months that will require proof of orign to get service updates. See
http://apnews.myway.com/article/20050126/D87RIG600.html for details.
ron ginger
Discussion Thread
Codesuidae
2005-01-27 15:25:12 UTC
Minimum reasonable computer speed?
Robert Campbell
2005-01-27 15:48:50 UTC
Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed?
R Rogers
2005-01-27 15:53:24 UTC
Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed?
Roy J. Tellason
2005-01-27 16:47:07 UTC
Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed?
Stephen Wille Padnos
2005-01-27 16:51:36 UTC
Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed?
R Rogers
2005-01-27 17:46:00 UTC
Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed?
Robert Campbell
2005-01-27 18:14:20 UTC
Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed?
Scott L Golden
2005-01-27 18:37:46 UTC
Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed?
turbulatordude
2005-01-27 18:40:23 UTC
Re: Minimum reasonable computer speed?
codeSuidae
2005-01-27 21:52:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: Minimum reasonable computer speed?
JanRwl@A...
2005-01-27 23:01:36 UTC
Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed?
Torsten
2005-01-27 23:50:22 UTC
Re: Minimum reasonable computer speed?
Ron Ginger
2005-01-28 06:20:17 UTC
Re: Minimum reasonable computer speed?
Richard Garnish
2005-01-28 06:30:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: Minimum reasonable computer speed?
cnc_4_me
2005-01-28 06:59:15 UTC
Re: Minimum reasonable computer speed?
R Rogers
2005-01-28 07:11:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Minimum reasonable computer speed?
turbulatordude
2005-01-28 07:24:04 UTC
Re: Minimum reasonable computer speed?
Fred Smith
2005-01-28 10:13:37 UTC
Re: Minimum reasonable computer speed?
Alan Marconett
2005-01-28 11:00:48 UTC
Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed?
JanRwl@A...
2005-01-28 22:25:37 UTC
Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed?
David A. Frantz
2005-01-29 08:18:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Minimum reasonable computer speed?