Re: Minimum reasonable computer speed?
Posted by
cnc_4_me
on 2005-01-28 06:59:15 UTC
This link has many linux cad programs...Never tried any though..
http://www.tech-edv.co.at/lunix/CADlinks.html
Wally
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Richard Garnish <rdg@m...>
wrote:
it if you have trouble.
are there, for OT subjects, that are not allowed on the CCED list.
EXCEPTIONS........
http://www.tech-edv.co.at/lunix/CADlinks.html
Wally
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Richard Garnish <rdg@m...>
wrote:
> Tried EMC? It's not as polished as Mach but does everything a CNCI'd
> control program ought to, and it's free :)
>
> As for a decent Linux CAD program... anyone have any suggestions?
> really love to get one.Prazi
>
> Richard
>
> On Fri, 2005-01-28 at 14:22, Ron Ginger wrote:
> > I use an old 333mhz pc with 196mb running Win2000 and Mach2 on my
> > mill. It runs fast enough for than machine. I Use a 750mhz on myCNC
> > router, and that is limited to about 65 in/min rapids, but it hasservos
> > and ratios that take 32,000 pulses per inch. It does runreliabily with
> > Mach set for the 35K pulse rate.CAM
> >
> > I sure wish Mach ran under Linux, and that I had a good CAD and
> > suite, Id love to not have any microsoft product in the house. Innext few
> > particular, note the new Microsoft policy to take effect in the
> > months that will require proof of orign to get service updates.See
> > http://apnews.myway.com/article/20050126/D87RIG600.html fordetails.
> >wanliker@a..., timg@k...
> > ron ginger
> >
> >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> > Moderator: pentam@c... indigo_red@q... davemucha@j...[Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DROaol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
it if you have trouble.
> > http://www.metalworking.com/news_servers.htmlto be a sister site to the CCED group, as many of the same members
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this
are there, for OT subjects, that are not allowed on the CCED list.
> >POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
Discussion Thread
Codesuidae
2005-01-27 15:25:12 UTC
Minimum reasonable computer speed?
Robert Campbell
2005-01-27 15:48:50 UTC
Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed?
R Rogers
2005-01-27 15:53:24 UTC
Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed?
Roy J. Tellason
2005-01-27 16:47:07 UTC
Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed?
Stephen Wille Padnos
2005-01-27 16:51:36 UTC
Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed?
R Rogers
2005-01-27 17:46:00 UTC
Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed?
Robert Campbell
2005-01-27 18:14:20 UTC
Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed?
Scott L Golden
2005-01-27 18:37:46 UTC
Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed?
turbulatordude
2005-01-27 18:40:23 UTC
Re: Minimum reasonable computer speed?
codeSuidae
2005-01-27 21:52:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: Minimum reasonable computer speed?
JanRwl@A...
2005-01-27 23:01:36 UTC
Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed?
Torsten
2005-01-27 23:50:22 UTC
Re: Minimum reasonable computer speed?
Ron Ginger
2005-01-28 06:20:17 UTC
Re: Minimum reasonable computer speed?
Richard Garnish
2005-01-28 06:30:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: Minimum reasonable computer speed?
cnc_4_me
2005-01-28 06:59:15 UTC
Re: Minimum reasonable computer speed?
R Rogers
2005-01-28 07:11:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Minimum reasonable computer speed?
turbulatordude
2005-01-28 07:24:04 UTC
Re: Minimum reasonable computer speed?
Fred Smith
2005-01-28 10:13:37 UTC
Re: Minimum reasonable computer speed?
Alan Marconett
2005-01-28 11:00:48 UTC
Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed?
JanRwl@A...
2005-01-28 22:25:37 UTC
Re: [CAD_CAM_EDM_DRO] Minimum reasonable computer speed?
David A. Frantz
2005-01-29 08:18:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Minimum reasonable computer speed?