CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: LPT1

on 2005-08-08 14:01:21 UTC
I am interested in the comment that sufficient voltage is available from a
USB port. I was looking to purchase a new laptop the other day to drive my
CNC interface, and was surprised to find that this particular make (Acer)
did not have a parallel port as standard. The salesman tried to sell me a
USB to Parallel converter, but as I was unsure that such a device would put
out sufficient volts, I declined the sale.

Can you confirm that the voltage from one of these USB-parallel converters
will put out sufficient volts?

Keith



At 05:19 08/08/2005, you wrote:

>In a message dated 8/7/2005 7:31:48 P.M. Central Daylight Time,
>dave_mucha@... writes:
>
>You can get 5v from the PC if the PC has 5V, but if you have less, that may
>be a problem.<<
>On newer PC's, you can steal 5VDC from a USB port. If you don't have those,
>there is almost-surely an unused "disk-drive power-plug" inside (the white
>things with the red, yellow, and two black wires). The Red wire should be 5
>VDC. The blacks are Gnd. (-ve). The yeller is 12 VDC.
>
>
>
>
>
>
>
>
>[Non-text portions of this message have been removed]
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
>timg@...
>Moderator: pentam@... indigo_red@...
>davemucha@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects
>goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to
>reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
>sister site to the CCED group, as many of the same members are there, for
>OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
>THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Anti-Virus.
>Version: 7.0.338 / Virus Database: 267.10.1/64 - Release Date: 04/08/2005

Discussion Thread

stcnc2000 2005-08-07 11:30:01 UTC LPT1 Robert Campbell 2005-08-07 11:42:26 UTC Re: [CAD_CAM_EDM_DRO] LPT1 stcnc2000 2005-08-07 12:05:53 UTC Re: LPT1 Steve Stallings 2005-08-07 12:38:04 UTC Re: LPT1 Robert Campbell 2005-08-07 12:50:39 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 thinkcnc@w... 2005-08-07 13:01:12 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 caudlet 2005-08-07 15:02:42 UTC Re: LPT1 thinkcnc@w... 2005-08-07 15:10:47 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 turbulatordude 2005-08-07 15:19:12 UTC Re: LPT1 thinkcnc@w... 2005-08-07 15:30:47 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 JanRwl@A... 2005-08-07 15:38:24 UTC Re: [CAD_CAM_EDM_DRO] LPT1 turbulatordude 2005-08-07 17:30:46 UTC Re: LPT1 JanRwl@A... 2005-08-07 21:24:49 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 Keith Bucklitch 2005-08-08 14:01:21 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 c_holm10017 2005-08-08 14:11:59 UTC Re: LPT1 Andy Wander 2005-08-08 14:19:46 UTC RE: [CAD_CAM_EDM_DRO] Re: LPT1 turbulatordude 2005-08-08 14:27:36 UTC Re: LPT1 JCullins 2005-08-08 14:45:39 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 Mike Delany 2005-08-08 15:09:04 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 JanRwl@A... 2005-08-08 17:47:51 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 Jon Elson 2005-08-08 19:13:25 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 Keith Bucklitch 2005-08-09 09:26:26 UTC RE: [CAD_CAM_EDM_DRO] Re: LPT1 Keith Bucklitch 2005-08-09 09:26:26 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 Keith Bucklitch 2005-08-09 09:26:26 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 George Taylor, IV 2005-08-09 13:15:39 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 Keith Bucklitch 2005-08-09 14:41:51 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 Andy Wander 2005-08-09 18:09:48 UTC RE: [CAD_CAM_EDM_DRO] Re: LPT1 Aahz. 2005-08-09 18:58:16 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 JanRwl@A... 2005-08-09 22:12:17 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 George Taylor, IV 2005-08-09 22:24:01 UTC RE: [CAD_CAM_EDM_DRO] Re: LPT1 Keith Bucklitch 2005-08-10 01:40:31 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 Marv Frankel 2005-08-10 03:12:13 UTC Re: LPT1 Keith Bucklitch 2005-08-10 09:57:50 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1