CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: LPT1

Posted by Andy Wander
on 2005-08-08 14:19:46 UTC
I THINK HE MEANS GETTING 5vdc OUT OF THE usb PORT-NOT USING THE usb PORT
ITSELF.

Andy Wander
Verrex Corporation

-----Original Message-----
From: c_holm10017 [mailto:cholm@...]
Sent: Monday, August 08, 2005 5:12 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: LPT1

Keith,

I have no idea whether a USB to LPT converter will provide the
required voltage, but you should also consider the software you are
planning to use. For example, TurboCNC ONLY runs under pure DOS and
unless you have DOS drivers with the USB to LPT connector that will
allow you to output to the standard LPT addresses, I bet you will be
out of luck. If your software is Windows based as I understand some
are (Maybe Mach??), this may not be a concern.

Chris

--- In CAD_CAM_EDM_DRO@yahoogroups.com, Keith Bucklitch
<keith.bucklitch@w...> wrote:
> I am interested in the comment that sufficient voltage is
available from a
> USB port. I was looking to purchase a new laptop the other day to
drive my
> CNC interface, and was surprised to find that this particular make
(Acer)
> did not have a parallel port as standard. The salesman tried to
sell me a
> USB to Parallel converter, but as I was unsure that such a device
would put
> out sufficient volts, I declined the sale.
>
> Can you confirm that the voltage from one of these USB-parallel
converters
> will put out sufficient volts?
>
> Keith
>
>
>
> At 05:19 08/08/2005, you wrote:
>
> >In a message dated 8/7/2005 7:31:48 P.M. Central Daylight Time,
> >dave_mucha@y... writes:
> >
> >You can get 5v from the PC if the PC has 5V, but if you have
less, that may
> >be a problem.<<
> >On newer PC's, you can steal 5VDC from a USB port. If you don't
have those,
> >there is almost-surely an unused "disk-drive power-plug" inside
(the white
> >things with the red, yellow, and two black wires). The Red wire
should be 5
> >VDC. The blacks are Gnd. (-ve). The yeller is 12 VDC.
> >
> >
> >
> >
> >
> >
> >
> >
> >[Non-text portions of this message have been removed]
> >
> >
> >
> >Addresses:
> >FAQ: http://www.ktmarketing.com/faq.html
> >FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> >Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> >Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> >List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@a...,
> >timg@k...
> >Moderator: pentam@c... indigo_red@q...
> >davemucha@j... [Moderators]
> >URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> >OFF Topic POSTS: General Machining
> >If you wish to post on unlimited OT subjects
> >goto: aol://5863:126/rec.crafts.metalworking or go thru
Google.com to
> >reach it if you have trouble.
> >http://www.metalworking.com/news_servers.html
> >
> >http://groups.yahoo.com/group/jobshophomeshop I consider this
to be a
> >sister site to the CCED group, as many of the same members are
there, for
> >OT subjects, that are not allowed on the CCED list.
> >
> >NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
POSTING
> >THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
EXCEPTIONS........
> >bill
> >List Mom
> >List Owner
> >
> >
> >Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >--
> >No virus found in this incoming message.
> >Checked by AVG Anti-Virus.
> >Version: 7.0.338 / Virus Database: 267.10.1/64 - Release Date:
04/08/2005




Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links

Discussion Thread

stcnc2000 2005-08-07 11:30:01 UTC LPT1 Robert Campbell 2005-08-07 11:42:26 UTC Re: [CAD_CAM_EDM_DRO] LPT1 stcnc2000 2005-08-07 12:05:53 UTC Re: LPT1 Steve Stallings 2005-08-07 12:38:04 UTC Re: LPT1 Robert Campbell 2005-08-07 12:50:39 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 thinkcnc@w... 2005-08-07 13:01:12 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 caudlet 2005-08-07 15:02:42 UTC Re: LPT1 thinkcnc@w... 2005-08-07 15:10:47 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 turbulatordude 2005-08-07 15:19:12 UTC Re: LPT1 thinkcnc@w... 2005-08-07 15:30:47 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 JanRwl@A... 2005-08-07 15:38:24 UTC Re: [CAD_CAM_EDM_DRO] LPT1 turbulatordude 2005-08-07 17:30:46 UTC Re: LPT1 JanRwl@A... 2005-08-07 21:24:49 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 Keith Bucklitch 2005-08-08 14:01:21 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 c_holm10017 2005-08-08 14:11:59 UTC Re: LPT1 Andy Wander 2005-08-08 14:19:46 UTC RE: [CAD_CAM_EDM_DRO] Re: LPT1 turbulatordude 2005-08-08 14:27:36 UTC Re: LPT1 JCullins 2005-08-08 14:45:39 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 Mike Delany 2005-08-08 15:09:04 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 JanRwl@A... 2005-08-08 17:47:51 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 Jon Elson 2005-08-08 19:13:25 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 Keith Bucklitch 2005-08-09 09:26:26 UTC RE: [CAD_CAM_EDM_DRO] Re: LPT1 Keith Bucklitch 2005-08-09 09:26:26 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 Keith Bucklitch 2005-08-09 09:26:26 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 George Taylor, IV 2005-08-09 13:15:39 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 Keith Bucklitch 2005-08-09 14:41:51 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 Andy Wander 2005-08-09 18:09:48 UTC RE: [CAD_CAM_EDM_DRO] Re: LPT1 Aahz. 2005-08-09 18:58:16 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 JanRwl@A... 2005-08-09 22:12:17 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 George Taylor, IV 2005-08-09 22:24:01 UTC RE: [CAD_CAM_EDM_DRO] Re: LPT1 Keith Bucklitch 2005-08-10 01:40:31 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1 Marv Frankel 2005-08-10 03:12:13 UTC Re: LPT1 Keith Bucklitch 2005-08-10 09:57:50 UTC Re: [CAD_CAM_EDM_DRO] Re: LPT1