RE: [CAD_CAM_EDM_DRO] Re: High Speed Spindle for SIEG X2 - Finally a Solution

I clicked on the link below, scrolled down about 1 page worth, and just
below "Our Latest Innovations", saw the high-speed spindle kit, complete
with link to click on.

________________________________________
Andy Wander


-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of John Stevenson
Sent: Thursday, July 20, 2006 11:00 AM
To: CAD_CAM_EDM_DRO@...
Subject: [CAD_CAM_EDM_DRO] Re: High Speed Spindle for SIEG X2 - Finally
a Solution

>
> >
> > I've got it on order - 5,000 to 20,000 rpm with six collets 1/32" to
> > 1/8" - for $170, which includes the mounting bracket for the SIEG
> > X2. You will find it on www.kdntool.com
> >
> <snip>
> >
> > Bill Perun
> >
>
> Hi Bill,
>
> Thanks for the write-up.
>
> I checked the KDN site (I hate sites with pains, especially ones that
> take up half the page.)
>
> I found a spindle plate that allows one to relocate the motor, or use
> a different motor, and also is much easier to change belts. This is
> much like the one LittleMachineShop offers.
>
> Is the spindle something that replaces the head on the mill, or an
> adapter that allows one to use a different motor ?
>
> Dave
>

I couldn't find it either.
Hate pages that hint but don't show, Oh well can do that with money as
well.

John S.



This communication including any attachments, are intended
for the exclusive use of the addressee(s) and contains
confidential or copyrighted materials. Duplication,
distribution or reproduction is strictly prohibited by law
without written permission of Verrex