Re: CNC Pro?
Posted by
Mike Phillips
on 2007-01-12 23:50:02 UTC
I'll look into it. Thanks Marv.
Mike
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Marv Frankel" <Dcdziner@...>
wrote:
Mike
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Marv Frankel" <Dcdziner@...>
wrote:
>for many
> Mike,
> There are several other add-ons to Mach3 that will generate
> G-code, that you might not be aware of. One is activated by the
> "Conversational" button in Mach3, and downloadable from
> http://newfangledsolutions.com The other is a pretty new piece of
> software written by Graham Hollis, one of the really talented guys,
> and the webmaster of our club (www.schsm.org) It's a really slick CAD
> program that generates G-code on the fly, and you can find it at
> http://d2nc.com
>
> Marv Frankel
> Los Angeles
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Mike Phillips"
> <mikep_95133@> wrote:
> >
> > Great explanation.
> >
> > After finally installing and playing with the free version of Mach3 I
> > can see it has some canned G-codes. That's helpful. But the Wizards
> > are the equivalent of the canned cycles I've seen on pro systems that
> > I was looking for. It was impressive that most of them were written by
> > users. The instructional videos were fantastic.
> >
> > The only downside is that this would require updating to Windows 2000
> > or the hard drive made into a dual boot drive so I can still use my
> > old files with CNCPro in 98 and Mach3 with 2000. Hmmm.
> >
> > I tried opening some of my old files with Mach3. It wasn't happy about
> > them for some reason. I'd go thru and have to hit reset and stop in
> > sequence even though they were already off, in order to get my old
> > code to start running. I was using Mach3 2.0.034. It would run after
> > that. Maybe I need some lines of code to set Mach3 into motion. My old
> > files are dead simple, maybe too simple.
> >
> > Mike
> >
> >
> >
> > --- In CAD_CAM_EDM_DRO@yahoogroups.com, Lester Caine <lsces@> wrote:
> > >
> > > Mike Phillips wrote:
> > >
> > > > Having canned cycles would be fantastic. Professional
> > > > software/hardware packages have that built in. Doesn't Mach3 have
> > > > wizards that generate g-code quickly? Maybe that's nearly a canned
> > > > cycle feature. I would like to skip the cad step altogether
> > > > easy items.somewhat
> > > This is one of the best features of Mach3 - along with LazyCAM.
> > > Those little jobs that it's not worth doing a drawing for are
> > > painless in Mach3.just the
> > >
> > > > Less steps are better!
> > > I think it depends on the type of job, but in general I find all I
> have
> > > to do is create the profiles I need ( not a full CAD drawing
> > > outlines ) process them to provide gCode and then just run the
> gCode. I
> > > don't think you can get fewer steps than that. Of cause producing
> a full
> > > dimensioned drawing for the records is essential but to a certain
> extent
> > > it's a side path. The elements you need for CAM are not
> necessarily the
> > > ideal ones for CAD, and it is often better to think about
> additional sub
> > > drawings then trying to extract the appropriate profiles from a
> pure CAD
> > > one. Layers with the profile for a particular height become one
> element
> > > in a dimensioned drawing :(
> > >
> > > --
> > > Lester Caine - G8HFL
> > > -----------------------------
> > > L.S.Caine Electronic Services - http://home.lsces.co.uk
> > > Model Engineers Digital Workshop -
> > > http://home.lsces.co.uk/ModelEngineersDigitalWorkshop/
> > > Treasurer - Firebird Foundation Inc. -
> > http://www.firebirdsql.org/index.php
> > >
> >
>
Discussion Thread
Tony Jeffree
2000-10-11 10:01:17 UTC
CNC Pro?
Carey L. Culpepper
2000-10-11 10:44:22 UTC
Re: [CAD_CAM_EDM_DRO] CNC Pro?
cnc002@a...
2000-10-11 11:36:50 UTC
Re: [CAD_CAM_EDM_DRO] CNC Pro?
Hugh Mahlendorf
2000-10-11 17:52:55 UTC
Sanyo "Step-Syn" Stepper Motors
Alan Marconett KM6VV
2000-10-11 18:19:16 UTC
Re: [CAD_CAM_EDM_DRO] Sanyo "Step-Syn" Stepper Motors
Doug Fortune
2000-10-11 18:42:43 UTC
Re: [CAD_CAM_EDM_DRO] Sanyo "Step-Syn" Stepper Motors
ballendo@y...
2000-10-12 00:06:12 UTC
re:Sanyo "Step-Syn" Stepper Motors
ballendo@y...
2000-10-12 00:18:04 UTC
Re: Sanyo "Step-Syn" Stepper Motors
cnc4me@u...
2000-10-12 00:25:04 UTC
Re: re:Sanyo "Step-Syn" Stepper Motors
ballendo@y...
2000-10-12 01:46:07 UTC
Re: re:Sanyo "Step-Syn" Stepper Motors
Mariss Freimanis
2000-10-12 10:13:13 UTC
Re: re:Sanyo "Step-Syn" Stepper Motors
Mike
2000-10-12 10:43:15 UTC
Help: PCB Trace Milling Software
Alan Marconett KM6VV
2000-10-12 13:09:47 UTC
Re: [CAD_CAM_EDM_DRO] Help: PCB Trace Milling Software
ballendo@y...
2000-10-12 14:29:14 UTC
Re: re:Sanyo "Step-Syn" Stepper Motors
Jon Elson
2000-10-12 14:56:41 UTC
Re: [CAD_CAM_EDM_DRO] Help: PCB Trace Milling Software
ballendo@y...
2000-10-12 15:13:12 UTC
Help: PCB Trace Milling Software
Mariss Freimanis
2000-10-12 15:16:38 UTC
Re: re:Sanyo "Step-Syn" Stepper Motors
Alan Marconett KM6VV
2000-10-12 15:34:55 UTC
Re: [CAD_CAM_EDM_DRO] Help: PCB Trace Milling Software
Alan Marconett KM6VV
2000-10-12 15:42:17 UTC
Re: [CAD_CAM_EDM_DRO] Help: PCB Trace Milling Software
Tom Caudle
2000-10-12 16:00:07 UTC
Re: Help: PCB Trace Milling Software
Tim Goldstein
2000-10-12 16:04:29 UTC
RE: [CAD_CAM_EDM_DRO] Help: PCB Trace Milling Software
Mike
2000-10-12 16:23:17 UTC
Re: Help: PCB Trace Milling Software
ballendo@y...
2000-10-12 16:30:29 UTC
Re: Help: PCB Trace Milling Software
Anne Ogborn
2000-10-12 16:31:21 UTC
Re: [CAD_CAM_EDM_DRO] Help: PCB Trace Milling Software
Alan Marconett KM6VV
2000-10-12 17:39:45 UTC
Re: Help: PCB Trace Milling Software
Edward Rupp
2000-10-12 17:54:52 UTC
Re: [CAD_CAM_EDM_DRO] Help: PCB Trace Milling Software
Tom Caudle
2000-10-12 19:27:33 UTC
Re: Help: PCB Trace Milling Software
cnc4me@u...
2000-10-12 19:27:52 UTC
Re: Help: PCB Trace Milling Software
Dan Mauch
2000-10-12 19:42:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: Help: PCB Trace Milling Software
Tom Caudle
2000-10-12 19:55:28 UTC
Re: Help: PCB Trace Milling Software
ballendo@y...
2000-10-12 19:59:32 UTC
Re: Help: PCB Trace Milling Software
Dan Mauch
2000-10-12 20:02:26 UTC
Re: [CAD_CAM_EDM_DRO] Help: PCB Trace Milling Software
Ron Hanson
2000-10-12 21:33:00 UTC
RE: [CAD_CAM_EDM_DRO] Help: PCB Trace Milling Software
Alan Marconett KM6VV
2000-10-12 22:37:03 UTC
Re: Help: PCB Trace Milling Software
Hugh Mahlendorf
2000-10-12 23:31:51 UTC
Re: [CAD_CAM_EDM_DRO] re:Sanyo "Step-Syn" Stepper Motors
Tony Jeffree
2000-10-12 23:43:46 UTC
Re: Help: PCB Trace Milling Software
Ian Wright
2000-10-13 01:17:56 UTC
Re: [CAD_CAM_EDM_DRO] Help: PCB Trace Milling Software
bfp
2000-10-13 03:04:50 UTC
Re: [CAD_CAM_EDM_DRO] Help: PCB Trace Milling Software
cnc4me@u...
2000-10-13 08:36:52 UTC
Re: Help: PCB Trace Milling Software
Alan Marconett KM6VV
2000-10-13 09:19:54 UTC
Re: [CAD_CAM_EDM_DRO] Help: PCB Trace Milling Software
Ron Hanson
2000-10-13 09:37:50 UTC
Re: [CAD_CAM_EDM_DRO] Help: PCB Trace Milling Software
Tim Goldstein
2000-10-13 09:41:15 UTC
RE: [CAD_CAM_EDM_DRO] Help: PCB Trace Milling Software
Tony Jeffree
2000-10-13 10:52:15 UTC
Re: Help: PCB Trace Milling Software
Hugh Prescott
2000-10-13 11:14:23 UTC
Re: [CAD_CAM_EDM_DRO] Help: PCB Trace Milling Software
Alan Marconett KM6VV
2000-10-13 11:45:09 UTC
Re: [CAD_CAM_EDM_DRO] Help: PCB Trace Milling Software
ballendo@y...
2000-10-13 12:20:13 UTC
Re: re:Sanyo "Step-Syn" Stepper Motors
cnc4me@u...
2000-10-13 12:23:24 UTC
Re: Help: PCB Trace Milling Software
Henrik Olsson
2000-10-13 12:46:47 UTC
RE: [CAD_CAM_EDM_DRO] Help: PCB Trace Milling Software
Jon Elson
2000-10-13 15:19:38 UTC
Re: [CAD_CAM_EDM_DRO] Help: PCB Trace Milling Software
Jon Elson
2000-10-13 15:47:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: Help: PCB Trace Milling Software
Edward Rupp
2000-10-13 16:51:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Help: PCB Trace Milling Software
Hugh Mahlendorf
2000-10-13 19:19:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: re:Sanyo "Step-Syn" Stepper Motors
Alan Marconett KM6VV
2000-10-13 22:19:16 UTC
Re: [CAD_CAM_EDM_DRO] Help: PCB Trace Milling Software
Jon Elson
2000-10-13 23:27:26 UTC
Re: [CAD_CAM_EDM_DRO] Help: PCB Trace Milling Software
Jon Elson
2000-10-16 09:20:06 UTC
Re: [CAD_CAM_EDM_DRO] Help: PCB Trace Milling Software
Dennis Bohlke
2000-10-16 10:37:04 UTC
Re: [CAD_CAM_EDM_DRO] Help: PCB Trace Milling Software
Alan Marconett KM6VV
2000-10-16 12:34:46 UTC
Re: [CAD_CAM_EDM_DRO] Help: PCB Trace Milling Software
Alan Marconett KM6VV
2000-10-16 13:04:53 UTC
Re: [CAD_CAM_EDM_DRO] Help: PCB Trace Milling Software
John Mesh
2007-01-08 23:44:13 UTC
CNC Pro?
Bob Muse
2007-01-09 03:14:39 UTC
Re: [CAD_CAM_EDM_DRO] CNC Pro?
Amine BELHOUT
2007-01-09 10:50:17 UTC
RE : Re: [CAD_CAM_EDM_DRO] CNC Pro?
Seiman H
2007-01-09 11:20:23 UTC
Re: RE : Re: [CAD_CAM_EDM_DRO] CNC Pro?
Mike Phillips
2007-01-10 14:22:54 UTC
Re: CNC Pro?
Vince Endter
2007-01-10 16:03:36 UTC
Re: CNC Pro?
Stephen Wille Padnos
2007-01-10 16:47:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC Pro?
John Dammeyer
2007-01-10 17:53:40 UTC
ELS and the Omikron
Jon Elson
2007-01-10 19:36:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC Pro?
Ron Kline
2007-01-10 19:52:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC Pro?
Mike Phillips
2007-01-10 22:19:15 UTC
Re: CNC Pro?
Lester Caine
2007-01-11 00:42:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC Pro?
Mike Phillips
2007-01-11 05:44:31 UTC
Re: CNC Pro?
Lester Caine
2007-01-11 07:07:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC Pro?
Mike Phillips
2007-01-11 11:01:32 UTC
Re: CNC Pro?
Marv Frankel
2007-01-12 03:39:22 UTC
Re: CNC Pro?
Mike Phillips
2007-01-12 23:50:02 UTC
Re: CNC Pro?
Mike Phillips
2007-01-12 23:52:23 UTC
Re: CNC Pro?
art
2007-01-16 07:09:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC Pro?
Mike Phillips
2007-01-16 22:14:02 UTC
Re: CNC Pro?