Re: [CAD_CAM_EDM_DRO] Re: Robotic Arm

Hi Graham,

I will, if you ley me know how the repair of the p&p heads are going. :-)

Cheers,

Peter

Graham Stabler wrote:

> You know both you and Jon have duty to take LOTS of pictures!
>
> Graham
>
>
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Peter Homann" <groups@...> wrote:
>> Hi Jon,
>>
>> Good choice. I received my Pick and place machine a couple of weeks ago.
>> It is a Yamaha YM-84, commonly known in the USA as a Philips CSM-84.
>>
>> It came with about 50 feedersas well. I've already run out of feeder
> slots
>> on the machine. It has 3 heads (0.7mm, 2mm and one about 4-5mm. It also
>> has a pneumatic centering station plus an upwards looking centering
> vision
>> camera. Plus a tray freeder
>>
>> Ran off a handful of ModIO panels and a DigiSpeed panel over the
> weekend.
>> It's quite a fun machine to use.
>>
>> One of the thinks I need to make is a number of waffle trays to hold
>> various components. One of them is the power inductor for the ModIO
> power
>> supply. I purchase a part reel without the reel and the tape is all
>> cracked up. Iplan to use some 4mm perspex to mill an array of pockets to
>> suit the inductor. I'll draw it up in Autocad and use sheetcam to do the
>> nesting array and produce the G-Code.
>>
>> I've had a days training on it, and it is now productive.
>>
>> Cheers,
>>
>> Peter.
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>

--
------------------------------------------------------------------
Web: www.homanndesigns.com
email: homann@...
Phone: +61 421 601 665
www.homanndesigns.com/ModIO.html - Modbus Interface Unit
www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board