CAD CAM EDM DRO - Yahoo Group Archive

Re: 1720XMTC shoptask z axis Ballscrews

Posted by jimmy_staton
on 2011-01-02 06:47:07 UTC
Wow thanks for all the help. Dan is it possible to upload some of the photo to the photos section. Mine is the old white model and I'd be interested in any of the mods that where made just for possible ideas.

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "danmauch" <dmauch@...> wrote:
>
>
> I went though some old pictures that I took of Chuck machine but most of them were on his White pre 1998 Gold machine. I Did find a picture of the quill set up on the white machine but it was different than I remembered his Gold machine. It didn't use a ballscrew. I did find some interesting pictures of his CNC tail stock mods using a tool turret and some other ones of the V8 engine he built.
> dmauch@...
> www.camtronics-cnc.com
> kits,assmebled and custom systems using gecko products
> stepper and servo systems
>
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, Andy Wander <awander@> wrote:
> >
> > Yeah, it only has the first couple of pages-and no photos.
> >
> > The site address was:
> > http://www15.brinkster.com/candgresearch/
> >
> >
> > Andy Wander
> >
> >
> > -----Original Message-----
> > From: CAD_CAM_EDM_DRO@yahoogroups.com [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Ron Thompson
> > Sent: Saturday, January 01, 2011 7:45 PM
> > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subject: Re: [CAD_CAM_EDM_DRO] 1720XMTC shoptask z axis Ballscrews
> >
> > On 1/1/2011 7:39 PM, Andy Wander wrote:
> > >
> > > HI Jimmy:
> > >
> > > I am also looking for more details on Chuck McGhee's conversion. I
> > > have only seen the photos at his old website, which appears to be
> > > defunct. I will keep you posted if I fid anything.
> > >
> > > Andy Wander
> > >
> > Sorry, I should have included the link:
> > http://www.archive.org/web/web.php
> >
> > --
> >
> >
> > Ron Thompson
> > On the Beautiful Florida Space Coast, right beside the Kennedy Space Center, USA
> >
> > There are two kinds of posts on newsgroups.
> > 1. This is what I have done...
> > 2. This is what I think...
> > Be aware of the difference!
> >
> > http://www.ourcadguy.com/
> >
> > http://www.plansandprojects.com My hobby pages are here:
> > http://www.plansandprojects.com/My%20Machines/
> >
> > Visit the castinghobby FAQ:
> > http://castinghobbyfaq.bareboogerhost.com/
> >
> >
> >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@, timg@
> > Moderator: pentam@ indigo_red@ davemucha@ [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> > Yahoo! Groups Links
> >
> >
> >
> > This communication including any attachments, are intended
> > for the exclusive use of the addressee(s) and contains
> > confidential or copyrighted materials. Duplication,
> > distribution or reproduction is strictly prohibited by law
> > without written permission of Verrex
> >
>

Discussion Thread

jimmy_staton 2010-12-31 17:03:15 UTC 1720XMTC shoptask z axis Ballscrews Andy Wander 2011-01-01 16:40:02 UTC RE: [CAD_CAM_EDM_DRO] 1720XMTC shoptask z axis Ballscrews Ron Thompson 2011-01-01 16:44:47 UTC Re: [CAD_CAM_EDM_DRO] 1720XMTC shoptask z axis Ballscrews Ron Thompson 2011-01-01 16:46:00 UTC Re: [CAD_CAM_EDM_DRO] 1720XMTC shoptask z axis Ballscrews Andy Wander 2011-01-01 16:51:49 UTC RE: [CAD_CAM_EDM_DRO] 1720XMTC shoptask z axis Ballscrews danmauch 2011-01-01 18:32:26 UTC Re: 1720XMTC shoptask z axis Ballscrews danmauch 2011-01-01 19:14:08 UTC Re: 1720XMTC shoptask z axis Ballscrews jimmy_staton 2011-01-02 06:47:07 UTC Re: 1720XMTC shoptask z axis Ballscrews jimmy_staton 2011-01-02 12:52:54 UTC Re: 1720XMTC shoptask z axis Ballscrews Ron Thompson 2011-01-02 13:06:27 UTC Re: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews jimmy_staton 2011-01-02 13:11:29 UTC Re: 1720XMTC shoptask z axis Ballscrews Ron Thompson 2011-01-02 13:17:35 UTC Re: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews jimmy_staton 2011-01-02 13:32:14 UTC Re: 1720XMTC shoptask z axis Ballscrews danmauch 2011-01-03 08:32:37 UTC Re: 1720XMTC shoptask z axis Ballscrews jimmy_staton 2011-01-03 12:57:10 UTC Re: 1720XMTC shoptask z axis Ballscrews danmauch 2011-01-04 07:20:59 UTC Re: 1720XMTC shoptask z axis Ballscrews William Thomas 2011-01-05 13:22:26 UTC Re: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews danmauch 2011-01-10 08:54:10 UTC Re: 1720XMTC shoptask z axis Ballscrews jimmy_staton 2011-01-21 14:37:39 UTC Re: 1720XMTC shoptask z axis Ballscrews Andy Wander 2011-01-21 21:14:32 UTC RE: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews jimmy_staton 2011-01-22 07:28:53 UTC Re: 1720XMTC shoptask z axis Ballscrews danmauch 2011-01-22 08:45:35 UTC Re: 1720XMTC shoptask z axis Ballscrews Andy Wander 2011-01-22 10:12:22 UTC RE: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews jimmy_staton 2011-01-22 12:41:26 UTC Re: 1720XMTC shoptask z axis Ballscrews jimmy_staton 2011-01-22 12:44:21 UTC Re: 1720XMTC shoptask z axis Ballscrews Andy Wander 2011-01-22 13:29:53 UTC RE: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews Andy Wander 2011-01-23 18:57:52 UTC RE: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews jimmy_staton 2011-01-23 19:27:48 UTC Re: 1720XMTC shoptask z axis Ballscrews Andy Wander 2011-01-23 20:23:30 UTC RE: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews Andy 2011-02-14 19:04:15 UTC Re: 1720XMTC shoptask z axis Ballscrews jimmy_staton 2011-04-11 17:02:07 UTC Re: 1720XMTC shoptask z axis Ballscrews Bloy 2012-10-15 12:25:48 UTC Re: 1720XMTC shoptask z axis Ballscrews