Re: 1720XMTC shoptask z axis Ballscrews
Posted by
Bloy
on 2012-10-15 12:25:48 UTC
I was just wondering what you did to protect the X-axis ball screw after attaching the ball nut directly to the carriage. Did you find some collapsible tubing? In the original setup(of my shoptask) a cover plate ran full length along the ball screw.
Thanks,
John M
Thanks,
John M
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "jimmy_staton" <olecoot@...> wrote:
>
> Just to finish this off I finally got the ball screw Z Axis mounted and I made a shoptask ball screw conversion video and at the end is some video of the Z axis setup if anyone is interested.
> http://youtu.be/2pNmaIEmHfs
Discussion Thread
jimmy_staton
2010-12-31 17:03:15 UTC
1720XMTC shoptask z axis Ballscrews
Andy Wander
2011-01-01 16:40:02 UTC
RE: [CAD_CAM_EDM_DRO] 1720XMTC shoptask z axis Ballscrews
Ron Thompson
2011-01-01 16:44:47 UTC
Re: [CAD_CAM_EDM_DRO] 1720XMTC shoptask z axis Ballscrews
Ron Thompson
2011-01-01 16:46:00 UTC
Re: [CAD_CAM_EDM_DRO] 1720XMTC shoptask z axis Ballscrews
Andy Wander
2011-01-01 16:51:49 UTC
RE: [CAD_CAM_EDM_DRO] 1720XMTC shoptask z axis Ballscrews
danmauch
2011-01-01 18:32:26 UTC
Re: 1720XMTC shoptask z axis Ballscrews
danmauch
2011-01-01 19:14:08 UTC
Re: 1720XMTC shoptask z axis Ballscrews
jimmy_staton
2011-01-02 06:47:07 UTC
Re: 1720XMTC shoptask z axis Ballscrews
jimmy_staton
2011-01-02 12:52:54 UTC
Re: 1720XMTC shoptask z axis Ballscrews
Ron Thompson
2011-01-02 13:06:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews
jimmy_staton
2011-01-02 13:11:29 UTC
Re: 1720XMTC shoptask z axis Ballscrews
Ron Thompson
2011-01-02 13:17:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews
jimmy_staton
2011-01-02 13:32:14 UTC
Re: 1720XMTC shoptask z axis Ballscrews
danmauch
2011-01-03 08:32:37 UTC
Re: 1720XMTC shoptask z axis Ballscrews
jimmy_staton
2011-01-03 12:57:10 UTC
Re: 1720XMTC shoptask z axis Ballscrews
danmauch
2011-01-04 07:20:59 UTC
Re: 1720XMTC shoptask z axis Ballscrews
William Thomas
2011-01-05 13:22:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews
danmauch
2011-01-10 08:54:10 UTC
Re: 1720XMTC shoptask z axis Ballscrews
jimmy_staton
2011-01-21 14:37:39 UTC
Re: 1720XMTC shoptask z axis Ballscrews
Andy Wander
2011-01-21 21:14:32 UTC
RE: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews
jimmy_staton
2011-01-22 07:28:53 UTC
Re: 1720XMTC shoptask z axis Ballscrews
danmauch
2011-01-22 08:45:35 UTC
Re: 1720XMTC shoptask z axis Ballscrews
Andy Wander
2011-01-22 10:12:22 UTC
RE: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews
jimmy_staton
2011-01-22 12:41:26 UTC
Re: 1720XMTC shoptask z axis Ballscrews
jimmy_staton
2011-01-22 12:44:21 UTC
Re: 1720XMTC shoptask z axis Ballscrews
Andy Wander
2011-01-22 13:29:53 UTC
RE: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews
Andy Wander
2011-01-23 18:57:52 UTC
RE: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews
jimmy_staton
2011-01-23 19:27:48 UTC
Re: 1720XMTC shoptask z axis Ballscrews
Andy Wander
2011-01-23 20:23:30 UTC
RE: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews
Andy
2011-02-14 19:04:15 UTC
Re: 1720XMTC shoptask z axis Ballscrews
jimmy_staton
2011-04-11 17:02:07 UTC
Re: 1720XMTC shoptask z axis Ballscrews
Bloy
2012-10-15 12:25:48 UTC
Re: 1720XMTC shoptask z axis Ballscrews