CAD CAM EDM DRO - Yahoo Group Archive

Re: 1720XMTC shoptask z axis Ballscrews

Posted by jimmy_staton
on 2011-01-02 13:32:14 UTC
If interested the photos are listed as "Chuck Mcghee (Shoptask)" in the photo section.

--- In CAD_CAM_EDM_DRO@yahoogroups.com, Ron Thompson <barebooger@...> wrote:
>
> On 1/2/2011 4:11 PM, jimmy_staton wrote:
> >
> > They're scattered in various archive directories. The though was that
> > the site might disappear like Chuck's website and this way they would
> > be in more than one place.
> >
> They are CNC related, so I'd make an album and upload them to the group
> photo section.
>
> --
>
>
> Ron Thompson
> On the Beautiful Florida Space Coast, right beside the Kennedy Space Center, USA
>
> There are two kinds of posts on newsgroups.
> 1. This is what I have done...
> 2. This is what I think...
> Be aware of the difference!
>
> http://www.ourcadguy.com/
>
> http://www.plansandprojects.com My hobby pages are here:
> http://www.plansandprojects.com/My%20Machines/
>
> Visit the castinghobby FAQ:
> http://castinghobbyfaq.bareboogerhost.com/
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

Discussion Thread

jimmy_staton 2010-12-31 17:03:15 UTC 1720XMTC shoptask z axis Ballscrews Andy Wander 2011-01-01 16:40:02 UTC RE: [CAD_CAM_EDM_DRO] 1720XMTC shoptask z axis Ballscrews Ron Thompson 2011-01-01 16:44:47 UTC Re: [CAD_CAM_EDM_DRO] 1720XMTC shoptask z axis Ballscrews Ron Thompson 2011-01-01 16:46:00 UTC Re: [CAD_CAM_EDM_DRO] 1720XMTC shoptask z axis Ballscrews Andy Wander 2011-01-01 16:51:49 UTC RE: [CAD_CAM_EDM_DRO] 1720XMTC shoptask z axis Ballscrews danmauch 2011-01-01 18:32:26 UTC Re: 1720XMTC shoptask z axis Ballscrews danmauch 2011-01-01 19:14:08 UTC Re: 1720XMTC shoptask z axis Ballscrews jimmy_staton 2011-01-02 06:47:07 UTC Re: 1720XMTC shoptask z axis Ballscrews jimmy_staton 2011-01-02 12:52:54 UTC Re: 1720XMTC shoptask z axis Ballscrews Ron Thompson 2011-01-02 13:06:27 UTC Re: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews jimmy_staton 2011-01-02 13:11:29 UTC Re: 1720XMTC shoptask z axis Ballscrews Ron Thompson 2011-01-02 13:17:35 UTC Re: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews jimmy_staton 2011-01-02 13:32:14 UTC Re: 1720XMTC shoptask z axis Ballscrews danmauch 2011-01-03 08:32:37 UTC Re: 1720XMTC shoptask z axis Ballscrews jimmy_staton 2011-01-03 12:57:10 UTC Re: 1720XMTC shoptask z axis Ballscrews danmauch 2011-01-04 07:20:59 UTC Re: 1720XMTC shoptask z axis Ballscrews William Thomas 2011-01-05 13:22:26 UTC Re: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews danmauch 2011-01-10 08:54:10 UTC Re: 1720XMTC shoptask z axis Ballscrews jimmy_staton 2011-01-21 14:37:39 UTC Re: 1720XMTC shoptask z axis Ballscrews Andy Wander 2011-01-21 21:14:32 UTC RE: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews jimmy_staton 2011-01-22 07:28:53 UTC Re: 1720XMTC shoptask z axis Ballscrews danmauch 2011-01-22 08:45:35 UTC Re: 1720XMTC shoptask z axis Ballscrews Andy Wander 2011-01-22 10:12:22 UTC RE: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews jimmy_staton 2011-01-22 12:41:26 UTC Re: 1720XMTC shoptask z axis Ballscrews jimmy_staton 2011-01-22 12:44:21 UTC Re: 1720XMTC shoptask z axis Ballscrews Andy Wander 2011-01-22 13:29:53 UTC RE: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews Andy Wander 2011-01-23 18:57:52 UTC RE: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews jimmy_staton 2011-01-23 19:27:48 UTC Re: 1720XMTC shoptask z axis Ballscrews Andy Wander 2011-01-23 20:23:30 UTC RE: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews Andy 2011-02-14 19:04:15 UTC Re: 1720XMTC shoptask z axis Ballscrews jimmy_staton 2011-04-11 17:02:07 UTC Re: 1720XMTC shoptask z axis Ballscrews Bloy 2012-10-15 12:25:48 UTC Re: 1720XMTC shoptask z axis Ballscrews