Re: 1720XMTC shoptask z axis Ballscrews
Posted by
danmauch
on 2011-01-04 07:20:59 UTC
I talked with Chuck last night and he mentioned that any one that wanted to know how he did the Z axis ballscrews on this Shoptask can give him a call. Contact me off line at
Dan Mauch
dmauch@...
Dan Mauch
dmauch@...
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "jimmy_staton" <olecoot@...> wrote:
>
> Their posted in the photo section now. I wished I had more detail on either the tail turret or z Axis bearing mount setup he used for the driven ballnut. The bearing couldn't be very thick "At least on the Tail turret", I debated on trying to use the High performance thrust bearing that McMaster Carr carry, I don't think the down force with 2 ballscrews on the quill would be that high. Any thoughts?
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "danmauch" <dmauch@> wrote:
> >
> > I don't see any reason why you can't post them here. You apparently have more pictures than I do.
> >
> > Dan
> >
> > --- In CAD_CAM_EDM_DRO@yahoogroups.com, "jimmy_staton" <olecoot@> wrote:
> > >
> > > Ok I found a bunch of various project photo of Chuck McGhee's about 3.4 Meg of jpegs I could post if that's allowed? They're from Metalworking.com dropsite.
> > > None are of the later Z axis, though one shows his toolpost turret and the driven ballnut is probably the same!
> > >
> > > --- In CAD_CAM_EDM_DRO@yahoogroups.com, "jimmy_staton" <olecoot@> wrote:
> > >
> >
>
Discussion Thread
jimmy_staton
2010-12-31 17:03:15 UTC
1720XMTC shoptask z axis Ballscrews
Andy Wander
2011-01-01 16:40:02 UTC
RE: [CAD_CAM_EDM_DRO] 1720XMTC shoptask z axis Ballscrews
Ron Thompson
2011-01-01 16:44:47 UTC
Re: [CAD_CAM_EDM_DRO] 1720XMTC shoptask z axis Ballscrews
Ron Thompson
2011-01-01 16:46:00 UTC
Re: [CAD_CAM_EDM_DRO] 1720XMTC shoptask z axis Ballscrews
Andy Wander
2011-01-01 16:51:49 UTC
RE: [CAD_CAM_EDM_DRO] 1720XMTC shoptask z axis Ballscrews
danmauch
2011-01-01 18:32:26 UTC
Re: 1720XMTC shoptask z axis Ballscrews
danmauch
2011-01-01 19:14:08 UTC
Re: 1720XMTC shoptask z axis Ballscrews
jimmy_staton
2011-01-02 06:47:07 UTC
Re: 1720XMTC shoptask z axis Ballscrews
jimmy_staton
2011-01-02 12:52:54 UTC
Re: 1720XMTC shoptask z axis Ballscrews
Ron Thompson
2011-01-02 13:06:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews
jimmy_staton
2011-01-02 13:11:29 UTC
Re: 1720XMTC shoptask z axis Ballscrews
Ron Thompson
2011-01-02 13:17:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews
jimmy_staton
2011-01-02 13:32:14 UTC
Re: 1720XMTC shoptask z axis Ballscrews
danmauch
2011-01-03 08:32:37 UTC
Re: 1720XMTC shoptask z axis Ballscrews
jimmy_staton
2011-01-03 12:57:10 UTC
Re: 1720XMTC shoptask z axis Ballscrews
danmauch
2011-01-04 07:20:59 UTC
Re: 1720XMTC shoptask z axis Ballscrews
William Thomas
2011-01-05 13:22:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews
danmauch
2011-01-10 08:54:10 UTC
Re: 1720XMTC shoptask z axis Ballscrews
jimmy_staton
2011-01-21 14:37:39 UTC
Re: 1720XMTC shoptask z axis Ballscrews
Andy Wander
2011-01-21 21:14:32 UTC
RE: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews
jimmy_staton
2011-01-22 07:28:53 UTC
Re: 1720XMTC shoptask z axis Ballscrews
danmauch
2011-01-22 08:45:35 UTC
Re: 1720XMTC shoptask z axis Ballscrews
Andy Wander
2011-01-22 10:12:22 UTC
RE: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews
jimmy_staton
2011-01-22 12:41:26 UTC
Re: 1720XMTC shoptask z axis Ballscrews
jimmy_staton
2011-01-22 12:44:21 UTC
Re: 1720XMTC shoptask z axis Ballscrews
Andy Wander
2011-01-22 13:29:53 UTC
RE: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews
Andy Wander
2011-01-23 18:57:52 UTC
RE: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews
jimmy_staton
2011-01-23 19:27:48 UTC
Re: 1720XMTC shoptask z axis Ballscrews
Andy Wander
2011-01-23 20:23:30 UTC
RE: [CAD_CAM_EDM_DRO] Re: 1720XMTC shoptask z axis Ballscrews
Andy
2011-02-14 19:04:15 UTC
Re: 1720XMTC shoptask z axis Ballscrews
jimmy_staton
2011-04-11 17:02:07 UTC
Re: 1720XMTC shoptask z axis Ballscrews
Bloy
2012-10-15 12:25:48 UTC
Re: 1720XMTC shoptask z axis Ballscrews