Re: [CAD_CAM_EDM_DRO] 3D Printing
Posted by
Ron Thompson
on 2012-12-18 10:09:56 UTC
On 12/18/2012 12:01 PM, John Dammeyer wrote:
--
Ron Thompson
On the Beautiful Florida Space Coast, right beside the Kennedy Space Center, USA
Think, Draw, Print. 3D printers ROCK!
http://www.plansandprojects.com/My%20Machines/PrusaMendel2012-1/
http://www.plansandprojects.com My hobby pages are here:
http://www.plansandprojects.com/My%20Machines/
Visit the castinghobby FAQ:
http://castinghobbyfaq.bareboogerhost.com/
> Ron,I saw this, but am on my way to work. Later...
>
> How about some specifics. Are you running micro-stepping? How many steps
> per inch? What's the maximum steps per second that you are running? Or
> is running one of these 3D printers just guesswork since it's all done
> with a small micro?
>
> Thanks
--
Ron Thompson
On the Beautiful Florida Space Coast, right beside the Kennedy Space Center, USA
Think, Draw, Print. 3D printers ROCK!
http://www.plansandprojects.com/My%20Machines/PrusaMendel2012-1/
http://www.plansandprojects.com My hobby pages are here:
http://www.plansandprojects.com/My%20Machines/
Visit the castinghobby FAQ:
http://castinghobbyfaq.bareboogerhost.com/
Discussion Thread
ebiz_59
2012-12-17 12:31:36 UTC
create a cut out vs pocket
jeremy youngs
2012-12-17 12:34:07 UTC
Re: [CAD_CAM_EDM_DRO] create a cut out vs pocket
Jack McKie
2012-12-17 12:34:56 UTC
Re: [CAD_CAM_EDM_DRO] create a cut out vs pocket
jeremy youngs
2012-12-17 12:40:12 UTC
Re: [CAD_CAM_EDM_DRO] create a cut out vs pocket
cnceeds
2012-12-17 18:35:39 UTC
Re: create a cut out vs pocket
Douglas Vogt
2012-12-17 18:36:25 UTC
Re: [CAD_CAM_EDM_DRO] create a cut out vs pocket
Jon Elson
2012-12-17 19:48:06 UTC
Re: [CAD_CAM_EDM_DRO] create a cut out vs pocket
John Dammeyer
2012-12-17 20:13:20 UTC
3D Printing
Michael Fagan
2012-12-17 21:37:33 UTC
Re: [CAD_CAM_EDM_DRO] create a cut out vs pocket
chuck merja
2012-12-17 22:14:52 UTC
Re: [CAD_CAM_EDM_DRO] 3D Printing
chuck merja
2012-12-17 22:17:43 UTC
Re: [CAD_CAM_EDM_DRO] create a cut out vs pocket
Tony Smith
2012-12-17 23:20:22 UTC
RE: [CAD_CAM_EDM_DRO] 3D Printing
John Dammeyer
2012-12-18 00:16:09 UTC
RE: [CAD_CAM_EDM_DRO] 3D Printing
Tony Smith
2012-12-18 01:08:10 UTC
RE: [CAD_CAM_EDM_DRO] 3D Printing
John Dammeyer
2012-12-18 01:42:04 UTC
RE: [CAD_CAM_EDM_DRO] 3D Printing
Tony Smith
2012-12-18 02:47:34 UTC
RE: [CAD_CAM_EDM_DRO] 3D Printing
Jamie Cunningham
2012-12-18 04:42:39 UTC
Re: [CAD_CAM_EDM_DRO] 3D Printing
Jack McKie
2012-12-18 05:30:07 UTC
Re: [CAD_CAM_EDM_DRO] 3D Printing
Kevin Martin
2012-12-18 05:43:05 UTC
RE: [CAD_CAM_EDM_DRO] 3D Printing
Drew
2012-12-18 07:03:39 UTC
Re: [CAD_CAM_EDM_DRO] 3D Printing
Jamie Cunningham
2012-12-18 07:10:19 UTC
Re: [CAD_CAM_EDM_DRO] 3D Printing
Ron Thompson
2012-12-18 07:54:50 UTC
Re: [CAD_CAM_EDM_DRO] 3D Printing
Drew
2012-12-18 08:08:10 UTC
Re: [CAD_CAM_EDM_DRO] 3D Printing
John Dammeyer
2012-12-18 09:02:46 UTC
RE: [CAD_CAM_EDM_DRO] 3D Printing
Ron Thompson
2012-12-18 10:09:56 UTC
Re: [CAD_CAM_EDM_DRO] 3D Printing
Tony Smith
2012-12-18 11:23:46 UTC
RE: [CAD_CAM_EDM_DRO] 3D Printing
Tony Smith
2012-12-18 11:25:14 UTC
RE: [CAD_CAM_EDM_DRO] 3D Printing
Scott A Tovey
2012-12-18 12:30:47 UTC
RE: [CAD_CAM_EDM_DRO] 3D Printing
Andy Wander
2012-12-18 12:43:46 UTC
RE: [CAD_CAM_EDM_DRO] 3D Printing
Ron Thompson
2012-12-18 22:00:59 UTC
Re: [CAD_CAM_EDM_DRO] 3D Printing
fortino tan
2012-12-23 05:04:03 UTC
RE: [CAD_CAM_EDM_DRO] 3D Printing
John Dammeyer
2012-12-23 08:37:32 UTC
RE: [CAD_CAM_EDM_DRO] 3D Printing
Scott A Tovey
2012-12-23 09:15:42 UTC
RE: [CAD_CAM_EDM_DRO] 3D Printing