RE: [CAD_CAM_EDM_DRO] USB options ...

It’s not that the up/down keys don’t work. They do. I click on the Z axis button. Press the up/down keys and the router goes up and down. Move the slider on the RHS of the motor tuning screen and see the velocity profile change.

Try the up/down keys and the Z axis moves at exactly the same speed. The setting chosen by the slider (both accel and velocity) aren’t passed down to the SS inside the dialog. Now if I adjust the slider, click OK and then use the jog buttons or go back into the motor turning dialog the motor now moves at the new speed.

But it’s not really tunable inside the dialog like it was with the ESS port.
John

That's very strange-the UP and DOWN arrow keys work for me in the motor tuning dialog, with my ESS, and they also worked with the USB SS I had before that.






[Non-text portions of this message have been removed]