RE: [CAD_CAM_EDM_DRO] USB options ...
OK, well that is unique to your system, and probably solvable.
If you are already tuned, though, it is not a priority, I bet.
Andy Wander
From:
CAD_CAM_EDM_DRO@yahoogroups.com [mailto:CAD_CAM_EDM_DRO@yahoogroups.com]
Sent: Friday, June 20, 2014 2:07
AM
To:
CAD_CAM_EDM_DRO@yahoogroups.com
Subject: RE: [CAD_CAM_EDM_DRO] USB
options ...
It’s not that the up/down keys don’t work. They do. I
click on the Z axis button. Press the up/down keys and the router goes up and
down. Move the slider on the RHS of the motor tuning screen and see the
velocity profile change.
Try the up/down keys and the Z axis moves at exactly the same speed. The
setting chosen by the slider (both accel and velocity) aren’t passed down to
the SS inside the dialog. Now if I adjust the slider, click OK and then use the
jog buttons or go back into the motor turning dialog the motor now moves at the
new speed.
But it’s not really tunable inside the dialog like it was with the ESS port.
John
That's very strange-the UP and DOWN arrow keys work for me in the motor tuning
dialog, with my ESS, and they also worked with the USB SS I had before that.
[Non-text portions of this message have been removed]