CAD CAM EDM DRO - Yahoo Group Archive

RE: Ballscrews/linear drive

on 2001-01-17 18:02:03 UTC
Steve and the list,

My garage door opener uses a chain. There is a "release" rope that
disengages the door linkage quickly, if needed. Have you thought about
using a similar drive to move your sliding doors?

Alan KM6VV
PS, I'm sure you won't forget the "emergency" stop sensors!

Steve Greenfield wrote:
>
>
> The ones I've seen don't seem to have this ability. I hesitate to rely
> on the slip of these to allow the doors to be forced open. The client
> had originally suggested some kind of door to open to pull a rope to
> turn the screw, but my instinct tells me that in an emergency
> situation where people just want to get out (smoke and fire, for
> example) -their- instinct is going to be to force the door, not stand
> there looking for instructions and a panel to open. Same goes for
> having some sort of handwheel, even out in the open.
>
> How do they do this on automatic sliding doors? They seem to just slip
> if you force them apart, albeit with great difficulty.
>
> Steve "Newbie" Greenfield

Discussion Thread

Steve Greenfield 2001-01-17 09:19:40 UTC Ballscrews/linear drive Tim Goldstein 2001-01-17 12:07:32 UTC RE: [CAD_CAM_EDM_DRO] Ballscrews/linear drive ballendo@y... 2001-01-17 12:41:05 UTC re:Ballscrews/linear drive ballendo@y... 2001-01-17 13:05:22 UTC re:RE: Ballscrews/linear drive Steve Greenfield 2001-01-17 14:32:04 UTC Re: re:RE: Ballscrews/linear drive dave engvall 2001-01-17 15:00:55 UTC Re: [CAD_CAM_EDM_DRO] Ballscrews/linear drive Smoke 2001-01-17 15:21:13 UTC Re: [CAD_CAM_EDM_DRO] Ballscrews/linear drive Tim Goldstein 2001-01-17 16:00:32 UTC RE: [CAD_CAM_EDM_DRO] Ballscrews/linear drive Steve Greenfield 2001-01-17 16:21:12 UTC Re: re:Ballscrews/linear drive Steve Greenfield 2001-01-17 16:26:40 UTC Re: Ballscrews/linear drive Steve Greenfield 2001-01-17 17:13:32 UTC Re: Ballscrews/linear drive Doug Harrison 2001-01-17 17:21:30 UTC Re: [CAD_CAM_EDM_DRO] Re: re:Ballscrews/linear drive Smoke 2001-01-17 17:38:01 UTC Re: [CAD_CAM_EDM_DRO] Re: Ballscrews/linear drive Rich D. 2001-01-17 17:43:43 UTC Re: [CAD_CAM_EDM_DRO] Re: Ballscrews/linear drive Alan Marconett KM6VV 2001-01-17 18:02:03 UTC RE: Ballscrews/linear drive wanliker@a... 2001-01-17 18:06:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Ballscrews/linear drive Les Watts 2001-01-17 18:25:16 UTC Re: [CAD_CAM_EDM_DRO] Re: re:Ballscrews/linear drive Ray 2001-01-17 19:31:35 UTC Re: re:RE: Ballscrews/linear drive Doug Harrison 2001-01-17 20:25:15 UTC Re: [CAD_CAM_EDM_DRO] RE: Ballscrews/linear drive Smoke 2001-01-17 20:58:49 UTC Re: [CAD_CAM_EDM_DRO] Re: re:Ballscrews/linear drive Steve Greenfield 2001-01-17 21:11:09 UTC Re: Ballscrews/linear drive Steve Greenfield 2001-01-17 21:14:29 UTC Re: Ballscrews/linear drive Smoke 2001-01-17 21:25:05 UTC Re: [CAD_CAM_EDM_DRO] Re: Ballscrews/linear drive Tony Jeffree 2001-01-18 00:44:25 UTC Re: Ballscrews/linear drive ballendo@y... 2001-01-18 04:27:20 UTC Re: Re: Ballscrews/linear drive Carlos Guillermo 2001-01-18 04:49:52 UTC Why ballscrews for linear drive? Steve Greenfield 2001-01-18 08:53:44 UTC Re: Ballscrews/linear drive Steve Greenfield 2001-01-18 09:06:09 UTC Re: Why ballscrews for linear drive? Steve Greenfield 2001-01-18 09:14:27 UTC Re: Why ballscrews for linear drive? Sven Peter, TAD S.A. 2001-01-18 11:45:05 UTC Re: [CAD_CAM_EDM_DRO] Re: re:RE: Ballscrews/linear drive