CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: Vac table, it works!

Posted by Tim Goldstein
on 2001-02-23 10:02:31 UTC
I have used the freon bottles for vacuum reservoirs up to 27" or so. Worked
fine. The only problem was eliminating a vacuum leak in the valve stem as it
was not designed to keep gas from being sucked in. Ended up just using some
non-hardening pipe dope and opened the valve all the way, smeared it on the
threads and then closed the valve and repeated. Once it was worked into the
threads the vacuum leak stopped and has not returned in the 8 or so years
since I set it up.

Tim
[Denver, CO]

> The 30 pound freon bottles avail usually for free at local AC
> shop, work well
> for the pressure and probably for the vacuum tank.
> bill
>
> FAQ: http://www.ktmarketing.com/faq.html

Discussion Thread

Jon Anderson 2001-02-21 20:32:07 UTC Vac table, it works! dougrasmussen@c... 2001-02-22 07:00:28 UTC Re: Vac table, it works! Smoke 2001-02-22 07:17:27 UTC Re: [CAD_CAM_EDM_DRO] Re: Vac table, it works! Jon Anderson 2001-02-22 07:23:42 UTC Re: [CAD_CAM_EDM_DRO] Re: Vac table, it works! Jon Elson 2001-02-22 12:37:40 UTC Re: [CAD_CAM_EDM_DRO] Re: Vac table, it works! Sven Peter, TAD S.A. 2001-02-22 14:19:09 UTC Re: [CAD_CAM_EDM_DRO] Re: Vac table, it works! ballendo@y... 2001-02-22 18:55:07 UTC vac pumps was Re: Vac table, it works! Jon Anderson 2001-02-22 19:29:50 UTC Re: [CAD_CAM_EDM_DRO] vac pumps was Re: Vac table, it works! ballendo@y... 2001-02-22 19:32:23 UTC vac pumps was Re: Vac table, it works! dougrasmussen@c... 2001-02-22 20:09:01 UTC Re: Vac table, it works! Jon Anderson 2001-02-22 21:15:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Vac table, it works! Jon Elson 2001-02-22 22:20:45 UTC Re: [CAD_CAM_EDM_DRO] vac pumps was Re: Vac table, it works! Jon Elson 2001-02-22 22:26:05 UTC Re: [CAD_CAM_EDM_DRO] Re: Vac table, it works! dave engvall 2001-02-23 08:18:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Vac table, it works! wanliker@a... 2001-02-23 09:34:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Vac table, it works! Greg Nuspel 2001-02-23 09:50:48 UTC Re: [CAD_CAM_EDM_DRO] Re: Vac table, it works! Tim Goldstein 2001-02-23 10:02:31 UTC RE: [CAD_CAM_EDM_DRO] Re: Vac table, it works! Ricks 2001-02-23 20:55:55 UTC RE: [CAD_CAM_EDM_DRO] Re: Vac table, it works! wanliker@a... 2001-02-23 21:42:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Vac table, it works! ptengin@a... 2001-02-23 23:52:40 UTC Re: [CAD_CAM_EDM_DRO] Re: Vac table, it works! Ricks 2001-02-24 20:48:28 UTC Re: [CAD_CAM_EDM_DRO] Re: Vac table, it works! Tim Goldstein 2001-02-24 21:35:09 UTC RE: [CAD_CAM_EDM_DRO] Re: Vac table, it works!