Re: Vac table, it works!
Posted by
dougrasmussen@c...
on 2001-02-22 20:09:01 UTC
Jon,
How would that work? Wouldn't the incoming liquid, etc be swirling
around instead of settling?
It just occurred to me....one of those devices that creates a vacuum
from compressed air would do the trick. Wonder how many cfm's they
consume?
thanks,
Doug
How would that work? Wouldn't the incoming liquid, etc be swirling
around instead of settling?
It just occurred to me....one of those devices that creates a vacuum
from compressed air would do the trick. Wonder how many cfm's they
consume?
thanks,
Doug
--- In CAD_CAM_EDM_DRO@y..., Jon Elson <jmelson@a...> wrote:
>
>
> One obvious solution is to have a tank that allows liquid to settle
to the
> bottom, while the pump draws from the top. Make sure it can handle
> the pressure differential, though! This should keep pretty much all
> foreign stuff out of the pump.
>
> Jon
Discussion Thread
Jon Anderson
2001-02-21 20:32:07 UTC
Vac table, it works!
dougrasmussen@c...
2001-02-22 07:00:28 UTC
Re: Vac table, it works!
Smoke
2001-02-22 07:17:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Vac table, it works!
Jon Anderson
2001-02-22 07:23:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: Vac table, it works!
Jon Elson
2001-02-22 12:37:40 UTC
Re: [CAD_CAM_EDM_DRO] Re: Vac table, it works!
Sven Peter, TAD S.A.
2001-02-22 14:19:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: Vac table, it works!
ballendo@y...
2001-02-22 18:55:07 UTC
vac pumps was Re: Vac table, it works!
Jon Anderson
2001-02-22 19:29:50 UTC
Re: [CAD_CAM_EDM_DRO] vac pumps was Re: Vac table, it works!
ballendo@y...
2001-02-22 19:32:23 UTC
vac pumps was Re: Vac table, it works!
dougrasmussen@c...
2001-02-22 20:09:01 UTC
Re: Vac table, it works!
Jon Anderson
2001-02-22 21:15:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: Vac table, it works!
Jon Elson
2001-02-22 22:20:45 UTC
Re: [CAD_CAM_EDM_DRO] vac pumps was Re: Vac table, it works!
Jon Elson
2001-02-22 22:26:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: Vac table, it works!
dave engvall
2001-02-23 08:18:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: Vac table, it works!
wanliker@a...
2001-02-23 09:34:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: Vac table, it works!
Greg Nuspel
2001-02-23 09:50:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: Vac table, it works!
Tim Goldstein
2001-02-23 10:02:31 UTC
RE: [CAD_CAM_EDM_DRO] Re: Vac table, it works!
Ricks
2001-02-23 20:55:55 UTC
RE: [CAD_CAM_EDM_DRO] Re: Vac table, it works!
wanliker@a...
2001-02-23 21:42:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: Vac table, it works!
ptengin@a...
2001-02-23 23:52:40 UTC
Re: [CAD_CAM_EDM_DRO] Re: Vac table, it works!
Ricks
2001-02-24 20:48:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: Vac table, it works!
Tim Goldstein
2001-02-24 21:35:09 UTC
RE: [CAD_CAM_EDM_DRO] Re: Vac table, it works!