Re: [CAD_CAM_EDM_DRO] Re: Smart/Dumb box again...

Ian,
Go to the Control Panel, click on "Add / Remove programs", then scroll down
the list until you find "netmeeting", click on it, then click on "Install /
Uninstall. Netmeeting will be uninstalled and that should be the end of
your problem.
Henry

----- Original Message -----
From: "Ian Wright" <Ian@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, February 28, 2001 1:58 AM
Subject: Re: [CAD_CAM_EDM_DRO] Re: Smart/Dumb box again...


> ----- Original Message -----
> From: "Brian Pitt" <bfp@...>
> >
> > but I think that would be getting ahead of ourselves , for the
development
> > and tinkering stage its easy to just stack up a couple of old castoff
PCs
> > networked and booting from the regular drives as PLCs-I/O expansion or
> > motion control boxes and downsize the cluster once the bugs get worked
out
> >
>
> Hi,
>
> I've been trying to set up a 486 as a dumb server but have hit a snag -
> maybe someone could help me out. This box has windows 98 on it (it doesn't
> seem to like linux) and the proble is that, when it first fires up, it
wants
> me to enter a password for 'netmeeting'. I don't have a password entered
so
> that's not a problem, but it won't proceed with the boot up unless it
> receives an 'enter' from a keyboard. Obviously this rather defeats the
idea
> of a dumb server as it means I have to have a keyboard and monitor hooked
up
> to it so I know when to hit the 'enter' key and be able to do it. I'm sure
> there must be a work-around - how do other people deal with this? Thanks,
>
> Ian
> --
> Ian W. Wright
> Sheffield UK
> www.iw63.freeserve.co.uk
>
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>