Re: [CAD_CAM_EDM_DRO] RTV Mold

Depending on the process. Sometimes they tell the mold number, machine,
place in the array if they are doing more then a one up......etc. All
depends on what their process and quality control are.

At 06:07 PM 8/3/2001 +0100, you wrote:

>On injection moulds what are those little things that look like clock dials
>you see sometimes? They have a bunch of numbers and a big arrow pointing to
>a setting that was on the mould itself and is now on the pattern. They're on
>loads of stuff like the door on my dishwasher.
>
>John
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/