Re: [CAD_CAM_EDM_DRO] Re: EMC problem/question

Hi Jon

Been playing around with the PERIOD parameter on a P166...

0.000016 - Instant reboot as soon as freqmod loads.
0.00016 - Freqmod loads, but the system then hangs.
0.0005 - Freqmod loads, Tkemc starts, and the axis will move. A snail will
beat a G00 move.

I know the computer is way under powered for freqmod, but it was fun trying to
get it to work. Also found out what happens if the numbers are too small <g>

Regards, Paul.

On Sun, 05 Aug 2001, Jon Elson wrote:

> Others have answered this, set output_scale the same as input_scale.
> And, put period back in. You need to set a reasonable interrupt interval
> for this parameter, somewhere between 16 uS (0.000016) and 40 uS
> (0.00004) seem to be numbers people have had success with.