CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Monarch 10EE lathe

Posted by Sven Peter
on 2001-10-08 20:33:29 UTC
Hello Marcus,
I do not know this particular Monarch lathe ,but all
6 Monarch lathes I saw till now were nice beefy work horses.
But get a close look on ways, lead screws and spindle bearings.
Many people abused their work horses and you will not get neither finish
nor dimensions out of a ship anchor like that.
If it is in good shape then it is a machine that might last the rest of
your life.
Wish you best luck
Sven Peter

Marcus & Eva wrote:
>
> Hi all:
> Have any of you ever driven a Monarch 10EE lathe?
> Is it a reasonably hunky machine for decently deep cuts in toolsteel?
> I'm looking seriously at one to upgrade from my 12x36 Chinese lathe.
> I need to be able to take 0.100" passes in a 3" diameter 4140 bar at
> 0.008"/turn or thereabouts for the machine to be worthwhile for me.
> This beast has 5 ponies, and weighs in at roughly 3000 lb for a 12.5x20
> machine but it only has a d3 camlock spindle. Looks a bit puny swinging a
> 10" 4 jaw!
> I also need to be able to get a decent finish and good roundness, neither of
> which my current machine is capable of.
> Cheers
>
> Marcus
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Discussion Thread

Marcus & Eva 2001-10-08 20:07:08 UTC Monarch 10EE lathe Sven Peter 2001-10-08 20:33:29 UTC Re: [CAD_CAM_EDM_DRO] Monarch 10EE lathe ccs@m... 2001-10-08 21:02:50 UTC Re: [CAD_CAM_EDM_DRO] Monarch 10EE lathe Ward M. 2001-10-09 00:20:31 UTC RE: [CAD_CAM_EDM_DRO] Monarch 10EE lathe Marcus & Eva 2001-10-09 08:08:57 UTC Re: [CAD_CAM_EDM_DRO] Monarch 10EE lathe dougrasmussen@c... 2001-10-09 10:00:45 UTC Re: Monarch 10EE lathe brian 2001-10-09 18:26:24 UTC Re: [CAD_CAM_EDM_DRO] Monarch 10EE lathe RJK 2001-10-09 21:01:52 UTC Re: [CAD_CAM_EDM_DRO] Monarch 10EE lathe Ward M. 2001-10-10 00:26:56 UTC RE: [CAD_CAM_EDM_DRO] Monarch 10EE lathe Ward M. 2001-10-10 00:40:08 UTC RE: [CAD_CAM_EDM_DRO] Re: Monarch 10EE lathe karl@c... 2001-10-10 08:15:53 UTC Re: Monarch 10EE lathe Marcus & Eva 2001-10-10 08:27:57 UTC Re: [CAD_CAM_EDM_DRO] Monarch 10EE lathe paul@a... 2001-10-10 11:57:06 UTC Re: [CAD_CAM_EDM_DRO] Monarch 10EE lathe Hire, Ejay 2001-10-10 13:39:42 UTC RE: [CAD_CAM_EDM_DRO] Re: Monarch 10EE lathe Ward M. 2001-10-10 21:09:39 UTC RE: [CAD_CAM_EDM_DRO] Monarch 10EE lathe brian 2001-10-11 16:29:46 UTC Re: [CAD_CAM_EDM_DRO] Monarch 10EE lathe