CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Flat Holes

on 2001-11-09 14:34:24 UTC
Just use an end mill after drilling the pilot hole. Carey

gm4ta@... wrote:

> Is there a special type of drill bit to make holes with perfectly
> flat bottoms? All the drill bits I see are somewhat tipped. I want to
> make flat-bottomed holes so I can recess socket head cap screws.
>
> -GM4T
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Discussion Thread

gm4ta@i... 2001-11-09 14:23:35 UTC Flat Holes ccs@m... 2001-11-09 14:31:39 UTC Re: [CAD_CAM_EDM_DRO] Flat Holes Carey L. Culpepper 2001-11-09 14:34:24 UTC Re: [CAD_CAM_EDM_DRO] Flat Holes Smoke 2001-11-09 15:22:44 UTC Re: [CAD_CAM_EDM_DRO] Flat Holes Alan Marconett KM6VV 2001-11-09 17:00:44 UTC Re: [CAD_CAM_EDM_DRO] Flat Holes heemanshu B Shah 2001-11-09 17:30:23 UTC Re: [CAD_CAM_EDM_DRO] Flat Holes gm4ta@i... 2001-11-09 18:53:46 UTC Re: Flat Holes ccs@m... 2001-11-09 19:15:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Flat Holes Marcus & Eva 2001-11-09 20:10:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Flat Holes Jon Elson 2001-11-09 22:16:38 UTC Re: [CAD_CAM_EDM_DRO] Flat Holes Rick Miller 2001-11-09 22:26:33 UTC Re: [CAD_CAM_EDM_DRO] Flat Holes Smoke 2001-11-09 22:31:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Flat Holes ppump11578@a... 2001-11-10 04:12:28 UTC Re: [CAD_CAM_EDM_DRO] Flat Holes Fred Smith 2001-11-10 10:29:44 UTC Re: Flat Holes Chris L 2001-11-10 11:03:01 UTC Re: [CAD_CAM_EDM_DRO] Re: Flat Holes dougrasmussen@c... 2001-11-10 17:15:20 UTC Re: Flat Holes gm4ta@i... 2001-11-10 18:41:55 UTC Re: Flat Holes Marcus & Eva 2001-11-10 19:20:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Flat Holes Jon Elson 2001-11-10 20:42:42 UTC Re: [CAD_CAM_EDM_DRO] Re: Flat Holes Smoke 2001-11-11 07:48:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Flat Holes Smoke 2001-11-11 07:51:43 UTC Re: [CAD_CAM_EDM_DRO] Re: Flat Holes johnhe 2001-11-11 08:25:24 UTC Re: [CAD_CAM_EDM_DRO] Re: Flat Holes Smoke 2001-11-11 18:29:57 UTC Re: [CAD_CAM_EDM_DRO] Re: Flat Holes ballendo@y... 2001-11-12 00:06:10 UTC Re: Flat Holes ballendo@y... 2001-11-12 01:53:02 UTC Re: Flat Holes