Re: [CAD_CAM_EDM_DRO] Flat Holes
Posted by
Smoke
on 2001-11-09 15:22:44 UTC
There are a couple of things you can do. One is to use a standard drill and
then use an end mill to finish the bottom. The other is to drill the hole
with a standard drill and then use another same size drill which has been
altered to cut a flat bottom. To make a flat bottom drill, first you grind
the end flat and square with the axis. Next you file relief angles on the
flutes.
Smoke
then use an end mill to finish the bottom. The other is to drill the hole
with a standard drill and then use another same size drill which has been
altered to cut a flat bottom. To make a flat bottom drill, first you grind
the end flat and square with the axis. Next you file relief angles on the
flutes.
Smoke
> Is there a special type of drill bit to make holes with perfectly
> flat bottoms? All the drill bits I see are somewhat tipped. I want to
> make flat-bottomed holes so I can recess socket head cap screws.
>
> -GM4T
>
Discussion Thread
gm4ta@i...
2001-11-09 14:23:35 UTC
Flat Holes
ccs@m...
2001-11-09 14:31:39 UTC
Re: [CAD_CAM_EDM_DRO] Flat Holes
Carey L. Culpepper
2001-11-09 14:34:24 UTC
Re: [CAD_CAM_EDM_DRO] Flat Holes
Smoke
2001-11-09 15:22:44 UTC
Re: [CAD_CAM_EDM_DRO] Flat Holes
Alan Marconett KM6VV
2001-11-09 17:00:44 UTC
Re: [CAD_CAM_EDM_DRO] Flat Holes
heemanshu B Shah
2001-11-09 17:30:23 UTC
Re: [CAD_CAM_EDM_DRO] Flat Holes
gm4ta@i...
2001-11-09 18:53:46 UTC
Re: Flat Holes
ccs@m...
2001-11-09 19:15:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: Flat Holes
Marcus & Eva
2001-11-09 20:10:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Flat Holes
Jon Elson
2001-11-09 22:16:38 UTC
Re: [CAD_CAM_EDM_DRO] Flat Holes
Rick Miller
2001-11-09 22:26:33 UTC
Re: [CAD_CAM_EDM_DRO] Flat Holes
Smoke
2001-11-09 22:31:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Flat Holes
ppump11578@a...
2001-11-10 04:12:28 UTC
Re: [CAD_CAM_EDM_DRO] Flat Holes
Fred Smith
2001-11-10 10:29:44 UTC
Re: Flat Holes
Chris L
2001-11-10 11:03:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Flat Holes
dougrasmussen@c...
2001-11-10 17:15:20 UTC
Re: Flat Holes
gm4ta@i...
2001-11-10 18:41:55 UTC
Re: Flat Holes
Marcus & Eva
2001-11-10 19:20:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Flat Holes
Jon Elson
2001-11-10 20:42:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: Flat Holes
Smoke
2001-11-11 07:48:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Flat Holes
Smoke
2001-11-11 07:51:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: Flat Holes
johnhe
2001-11-11 08:25:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: Flat Holes
Smoke
2001-11-11 18:29:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: Flat Holes
ballendo@y...
2001-11-12 00:06:10 UTC
Re: Flat Holes
ballendo@y...
2001-11-12 01:53:02 UTC
Re: Flat Holes