Re: [CAD_CAM_EDM_DRO] tangential cutter software
Posted by
Chris L
on 2001-11-29 19:45:11 UTC
Peter,
If you do have some money available for something beyond the
freeware/shareware market, you might want to look into Vinyl cutting
software. Likely, most of what you will be doing will be "On the Line"
cutting. Most all of your modern offerings allow for tangential output
because the plotters use it. Usually you are offered many options for that
toolpath as well like "Pounce".
I watched a commercial carboard box prototype machine in action once. Really
neat ! They even had tangential rollers to come down and make the creases.
SignLab, FlexiSign, SignWizard, SignMate, and numerous Corel "Add-Ons" come
to mind.
The following SignBased Websites will probably have links.
Chris Luebke
http://lexx.nbm.com/index.php?page=sbgeneral
http://www.signindustry.com/
http://www.signweb.com/
p_uhd@... wrote:
If you do have some money available for something beyond the
freeware/shareware market, you might want to look into Vinyl cutting
software. Likely, most of what you will be doing will be "On the Line"
cutting. Most all of your modern offerings allow for tangential output
because the plotters use it. Usually you are offered many options for that
toolpath as well like "Pounce".
I watched a commercial carboard box prototype machine in action once. Really
neat ! They even had tangential rollers to come down and make the creases.
SignLab, FlexiSign, SignWizard, SignMate, and numerous Corel "Add-Ons" come
to mind.
The following SignBased Websites will probably have links.
Chris Luebke
http://lexx.nbm.com/index.php?page=sbgeneral
http://www.signindustry.com/
http://www.signweb.com/
p_uhd@... wrote:
> I am making a machine to cut 2mm thick cardboard for architectural
> models and fabric cutting. I am looking for CAM software for this
> that will operate a tangential cutter. My arrangement is with a xyzc
> machine. The c being the rotation of the knife. The z can be either
> stepper or solenoid controlled.
>
> The only software I have found so far that will automatically output
> c as tangential to a drawn line is Dancam. Even still I don't know
> how
> to obtain dancam as his website dosen't seem to have it available.
>
> I do have a small budget available for the software and would greatly
> appreciate any leads on suitable programs. I already use Autocad for
> the cad so it is the cam side of the equation that I am searching high
> and low for.
>
> Also if anyone has built a similar machine or is planning to I would
> be very happy to hear from you.
>
> With thanks,
>
> Peter Uhd
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Discussion Thread
p_uhd@f...
2001-11-29 19:12:01 UTC
tangential cutter software
Tim Goldstein
2001-11-29 19:21:48 UTC
RE: [CAD_CAM_EDM_DRO] tangential cutter software
Chris L
2001-11-29 19:45:11 UTC
Re: [CAD_CAM_EDM_DRO] tangential cutter software
Fred Smith
2001-11-29 20:24:14 UTC
Re: tangential cutter software
Alan Marconett KM6VV
2001-11-29 20:36:35 UTC
Re: [CAD_CAM_EDM_DRO] tangential cutter software
Chris L
2001-11-29 22:14:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: tangential cutter software
dougrasmussen@c...
2001-11-29 22:29:54 UTC
Re: tangential cutter software
Chris L
2001-11-29 22:37:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: tangential cutter software
Alan Marconett KM6VV
2001-11-30 00:20:58 UTC
Re: tangential cutter software
Michael Milligan
2001-11-30 00:28:38 UTC
RE: [CAD_CAM_EDM_DRO] tangential cutter software
dlantz@a...
2001-11-30 05:01:48 UTC
RE: [CAD_CAM_EDM_DRO] Re: tangential cutter software
David M. Munro
2001-11-30 06:03:36 UTC
Re: [CAD_CAM_EDM_DRO] tangential cutter software
p_uhd@f...
2001-11-30 06:55:28 UTC
Re: tangential cutter
p_uhd@f...
2001-11-30 06:56:09 UTC
Re: tangential cutter
ccs@m...
2001-11-30 07:07:20 UTC
Re: [CAD_CAM_EDM_DRO] tangential cutter software
ccs@m...
2001-11-30 07:26:21 UTC
geckos was Re: tangential cutter
mariss92705@y...
2001-11-30 10:34:41 UTC
geckos was Re: tangential cutter
Drew Rogge
2001-11-30 10:38:47 UTC
Re: [CAD_CAM_EDM_DRO] geckos was Re: tangential cutter
mariss92705@y...
2001-11-30 12:09:41 UTC
geckos was Re: tangential cutter
Dave Engvall
2001-11-30 16:31:22 UTC
Re: [CAD_CAM_EDM_DRO] geckos was Re: tangential cutter
Brian Walsh
2001-11-30 17:37:10 UTC
Re: [CAD_CAM_EDM_DRO] geckos was Re: tangential cutter