Re: tangential cutter software

--- In CAD_CAM_EDM_DRO@y..., p_uhd@f... wrote:

> I am making a machine to cut 2mm thick cardboard for architectural
> models and fabric cutting. I am looking for CAM software for this
> that will operate a tangential cutter. My arrangement is with a

xyzc

> machine. The c being the rotation of the knife. The z can be either
> stepper or solenoid controlled.

This controller software will do what you want, based soley on input
of XYZ G-code:

http://www.wigits.com/pat/mill/index.htm

It can slave the C axis tangential, based on the X-Y sequencing.

Best Regards,

Fred Smith
IMServcie