CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] geckos was Re: tangential cutter

Posted by Dave Engvall
on 2001-11-30 16:31:22 UTC
On 11/30/01 12:09 PM, "mariss92705@..." <mariss92705@...> wrote:
Hang tough Mariss.
At least up here service has not gone away yet.......
Charter.pipeline has a web page up....and I suspect will continue local
operations. It may stay together yet. Dropping back to DSL would be a bummer
but might be necessary since I live in the boonies...two miles out of a
small town in the Yakima Valley.....drink Tree Top apple juice....(only
local industry besides raw apples.

Dave

> Drew,
>
> Now all I have to worry about is losing our cable modem. It seems
> excite@home has gone bankrupt and they may pull the "plug" Dec 1 on
> all @home users. I will have to run out, buy a 56K modem and sign up
> with a dial-up provider. Just like the good old days :(
>
> Mariss

Discussion Thread

p_uhd@f... 2001-11-29 19:12:01 UTC tangential cutter software Tim Goldstein 2001-11-29 19:21:48 UTC RE: [CAD_CAM_EDM_DRO] tangential cutter software Chris L 2001-11-29 19:45:11 UTC Re: [CAD_CAM_EDM_DRO] tangential cutter software Fred Smith 2001-11-29 20:24:14 UTC Re: tangential cutter software Alan Marconett KM6VV 2001-11-29 20:36:35 UTC Re: [CAD_CAM_EDM_DRO] tangential cutter software Chris L 2001-11-29 22:14:45 UTC Re: [CAD_CAM_EDM_DRO] Re: tangential cutter software dougrasmussen@c... 2001-11-29 22:29:54 UTC Re: tangential cutter software Chris L 2001-11-29 22:37:53 UTC Re: [CAD_CAM_EDM_DRO] Re: tangential cutter software Alan Marconett KM6VV 2001-11-30 00:20:58 UTC Re: tangential cutter software Michael Milligan 2001-11-30 00:28:38 UTC RE: [CAD_CAM_EDM_DRO] tangential cutter software dlantz@a... 2001-11-30 05:01:48 UTC RE: [CAD_CAM_EDM_DRO] Re: tangential cutter software David M. Munro 2001-11-30 06:03:36 UTC Re: [CAD_CAM_EDM_DRO] tangential cutter software p_uhd@f... 2001-11-30 06:55:28 UTC Re: tangential cutter p_uhd@f... 2001-11-30 06:56:09 UTC Re: tangential cutter ccs@m... 2001-11-30 07:07:20 UTC Re: [CAD_CAM_EDM_DRO] tangential cutter software ccs@m... 2001-11-30 07:26:21 UTC geckos was Re: tangential cutter mariss92705@y... 2001-11-30 10:34:41 UTC geckos was Re: tangential cutter Drew Rogge 2001-11-30 10:38:47 UTC Re: [CAD_CAM_EDM_DRO] geckos was Re: tangential cutter mariss92705@y... 2001-11-30 12:09:41 UTC geckos was Re: tangential cutter Dave Engvall 2001-11-30 16:31:22 UTC Re: [CAD_CAM_EDM_DRO] geckos was Re: tangential cutter Brian Walsh 2001-11-30 17:37:10 UTC Re: [CAD_CAM_EDM_DRO] geckos was Re: tangential cutter