CAD CAM EDM DRO - Yahoo Group Archive

tangential cutter software

Posted by p_uhd@f...
on 2001-11-29 19:12:01 UTC
I am making a machine to cut 2mm thick cardboard for architectural
models and fabric cutting. I am looking for CAM software for this
that will operate a tangential cutter. My arrangement is with a xyzc
machine. The c being the rotation of the knife. The z can be either
stepper or solenoid controlled.

The only software I have found so far that will automatically output
c as tangential to a drawn line is Dancam. Even still I don't know
how
to obtain dancam as his website dosen't seem to have it available.

I do have a small budget available for the software and would greatly
appreciate any leads on suitable programs. I already use Autocad for
the cad so it is the cam side of the equation that I am searching high
and low for.

Also if anyone has built a similar machine or is planning to I would
be very happy to hear from you.

With thanks,

Peter Uhd

Discussion Thread

p_uhd@f... 2001-11-29 19:12:01 UTC tangential cutter software Tim Goldstein 2001-11-29 19:21:48 UTC RE: [CAD_CAM_EDM_DRO] tangential cutter software Chris L 2001-11-29 19:45:11 UTC Re: [CAD_CAM_EDM_DRO] tangential cutter software Fred Smith 2001-11-29 20:24:14 UTC Re: tangential cutter software Alan Marconett KM6VV 2001-11-29 20:36:35 UTC Re: [CAD_CAM_EDM_DRO] tangential cutter software Chris L 2001-11-29 22:14:45 UTC Re: [CAD_CAM_EDM_DRO] Re: tangential cutter software dougrasmussen@c... 2001-11-29 22:29:54 UTC Re: tangential cutter software Chris L 2001-11-29 22:37:53 UTC Re: [CAD_CAM_EDM_DRO] Re: tangential cutter software Alan Marconett KM6VV 2001-11-30 00:20:58 UTC Re: tangential cutter software Michael Milligan 2001-11-30 00:28:38 UTC RE: [CAD_CAM_EDM_DRO] tangential cutter software dlantz@a... 2001-11-30 05:01:48 UTC RE: [CAD_CAM_EDM_DRO] Re: tangential cutter software David M. Munro 2001-11-30 06:03:36 UTC Re: [CAD_CAM_EDM_DRO] tangential cutter software p_uhd@f... 2001-11-30 06:55:28 UTC Re: tangential cutter p_uhd@f... 2001-11-30 06:56:09 UTC Re: tangential cutter ccs@m... 2001-11-30 07:07:20 UTC Re: [CAD_CAM_EDM_DRO] tangential cutter software ccs@m... 2001-11-30 07:26:21 UTC geckos was Re: tangential cutter mariss92705@y... 2001-11-30 10:34:41 UTC geckos was Re: tangential cutter Drew Rogge 2001-11-30 10:38:47 UTC Re: [CAD_CAM_EDM_DRO] geckos was Re: tangential cutter mariss92705@y... 2001-11-30 12:09:41 UTC geckos was Re: tangential cutter Dave Engvall 2001-11-30 16:31:22 UTC Re: [CAD_CAM_EDM_DRO] geckos was Re: tangential cutter Brian Walsh 2001-11-30 17:37:10 UTC Re: [CAD_CAM_EDM_DRO] geckos was Re: tangential cutter