Re: [CAD_CAM_EDM_DRO] Re: tangential cutter software

Fred,
Are you familiar with that program? Have you seen it on any machines ?

Chris L

Fred Smith wrote:

> --- In CAD_CAM_EDM_DRO@y..., p_uhd@f... wrote:
> > I am making a machine to cut 2mm thick cardboard for architectural
> > models and fabric cutting. I am looking for CAM software for this
> > that will operate a tangential cutter. My arrangement is with a
> xyzc
> > machine. The c being the rotation of the knife. The z can be either
> > stepper or solenoid controlled.
>
> This controller software will do what you want, based soley on input
> of XYZ G-code:
>
> http://www.wigits.com/pat/mill/index.htm
>
> It can slave the C axis tangential, based on the X-Y sequencing.
>
> Best Regards,
>
> Fred Smith
> IMServcie
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/