Re: [CAD_CAM_EDM_DRO] tangential cutter software
Posted by
Alan Marconett KM6VV
on 2001-11-29 20:36:35 UTC
Hi Peter,
Interesting project! Sounds like the CAD/CAM software has to generate
the C axis? We might ask Fred of Vector CAD/CAM fame! Are you looking
to BUILD the hardware also? Would you mount the C axis on the Z then?
What accuracy in angle would be needed in C? How much torque?
Maybe the airplane wing guys would have an answer?
I don't think Dancam is available anymore, although someone might be
able to come up with a copy (let's all look).
I don't have any answers, but I'd like to here more!
Alan KM6VV
(learning mode)
p_uhd@... wrote:
Interesting project! Sounds like the CAD/CAM software has to generate
the C axis? We might ask Fred of Vector CAD/CAM fame! Are you looking
to BUILD the hardware also? Would you mount the C axis on the Z then?
What accuracy in angle would be needed in C? How much torque?
Maybe the airplane wing guys would have an answer?
I don't think Dancam is available anymore, although someone might be
able to come up with a copy (let's all look).
I don't have any answers, but I'd like to here more!
Alan KM6VV
(learning mode)
p_uhd@... wrote:
>
> I am making a machine to cut 2mm thick cardboard for architectural
> models and fabric cutting. I am looking for CAM software for this
> that will operate a tangential cutter. My arrangement is with a xyzc
> machine. The c being the rotation of the knife. The z can be either
> stepper or solenoid controlled.
>
> The only software I have found so far that will automatically output
> c as tangential to a drawn line is Dancam. Even still I don't know
> how
> to obtain dancam as his website dosen't seem to have it available.
>
> I do have a small budget available for the software and would greatly
> appreciate any leads on suitable programs. I already use Autocad for
> the cad so it is the cam side of the equation that I am searching high
> and low for.
>
> Also if anyone has built a similar machine or is planning to I would
> be very happy to hear from you.
>
> With thanks,
>
> Peter Uhd
Discussion Thread
p_uhd@f...
2001-11-29 19:12:01 UTC
tangential cutter software
Tim Goldstein
2001-11-29 19:21:48 UTC
RE: [CAD_CAM_EDM_DRO] tangential cutter software
Chris L
2001-11-29 19:45:11 UTC
Re: [CAD_CAM_EDM_DRO] tangential cutter software
Fred Smith
2001-11-29 20:24:14 UTC
Re: tangential cutter software
Alan Marconett KM6VV
2001-11-29 20:36:35 UTC
Re: [CAD_CAM_EDM_DRO] tangential cutter software
Chris L
2001-11-29 22:14:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: tangential cutter software
dougrasmussen@c...
2001-11-29 22:29:54 UTC
Re: tangential cutter software
Chris L
2001-11-29 22:37:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: tangential cutter software
Alan Marconett KM6VV
2001-11-30 00:20:58 UTC
Re: tangential cutter software
Michael Milligan
2001-11-30 00:28:38 UTC
RE: [CAD_CAM_EDM_DRO] tangential cutter software
dlantz@a...
2001-11-30 05:01:48 UTC
RE: [CAD_CAM_EDM_DRO] Re: tangential cutter software
David M. Munro
2001-11-30 06:03:36 UTC
Re: [CAD_CAM_EDM_DRO] tangential cutter software
p_uhd@f...
2001-11-30 06:55:28 UTC
Re: tangential cutter
p_uhd@f...
2001-11-30 06:56:09 UTC
Re: tangential cutter
ccs@m...
2001-11-30 07:07:20 UTC
Re: [CAD_CAM_EDM_DRO] tangential cutter software
ccs@m...
2001-11-30 07:26:21 UTC
geckos was Re: tangential cutter
mariss92705@y...
2001-11-30 10:34:41 UTC
geckos was Re: tangential cutter
Drew Rogge
2001-11-30 10:38:47 UTC
Re: [CAD_CAM_EDM_DRO] geckos was Re: tangential cutter
mariss92705@y...
2001-11-30 12:09:41 UTC
geckos was Re: tangential cutter
Dave Engvall
2001-11-30 16:31:22 UTC
Re: [CAD_CAM_EDM_DRO] geckos was Re: tangential cutter
Brian Walsh
2001-11-30 17:37:10 UTC
Re: [CAD_CAM_EDM_DRO] geckos was Re: tangential cutter