CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] geckos was Re: tangential cutter

Posted by Brian Walsh
on 2001-11-30 17:37:10 UTC
Quite right.

Brian Walsh
Glasgow
Scotland


----- Original Message -----
From: <mariss92705@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, November 30, 2001 06:34
Subject: [CAD_CAM_EDM_DRO] geckos was Re: tangential cutter


> Hi,
>
> www.geckodrives.com no longer sells our products. They were squatting
> on our name and were repeatedly asked to stop using it. They refused
> so we were forced to go to "cyber-court". Last week a decision was
> handed down in our favor, transfering the domain name to us. This
> transfer will be completed in the next few days.
>
> I just thought I would explain this to those who might be interested.
>
> Mariss
> Geckodrive Inc.
>
>
> --- In CAD_CAM_EDM_DRO@y..., ccs@m... wrote:
> >
> > > searching for surplus. There is a new gecko driver G201a that
> seems
> > > really neat and is well priced at $195 US but I dont understand
> how
> > > many motors and relays it will operate. I am looking at using
> NEMA34
> > > steppers with say 450 ounce/inch torque.
> >
> > The G201a drives only one motor, so you need several of them. You
> > might look at the G210 which is actually a better unit, but cheaper
> > due to different distribution channels. See www.geckodrive.com
> (there
> > is also a site at geckodrives.com that resells them at markup)
> >
> > Chris Stratton
> >
> > -------------------------------------------------
> > Christopher C. Stratton
> > Engineer, Instrument Maker, and Horn Player
> > ccs@m... 617 628 1062
> > http://web.mit.edu/~stratton/www/brassbuild.html
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Discussion Thread

p_uhd@f... 2001-11-29 19:12:01 UTC tangential cutter software Tim Goldstein 2001-11-29 19:21:48 UTC RE: [CAD_CAM_EDM_DRO] tangential cutter software Chris L 2001-11-29 19:45:11 UTC Re: [CAD_CAM_EDM_DRO] tangential cutter software Fred Smith 2001-11-29 20:24:14 UTC Re: tangential cutter software Alan Marconett KM6VV 2001-11-29 20:36:35 UTC Re: [CAD_CAM_EDM_DRO] tangential cutter software Chris L 2001-11-29 22:14:45 UTC Re: [CAD_CAM_EDM_DRO] Re: tangential cutter software dougrasmussen@c... 2001-11-29 22:29:54 UTC Re: tangential cutter software Chris L 2001-11-29 22:37:53 UTC Re: [CAD_CAM_EDM_DRO] Re: tangential cutter software Alan Marconett KM6VV 2001-11-30 00:20:58 UTC Re: tangential cutter software Michael Milligan 2001-11-30 00:28:38 UTC RE: [CAD_CAM_EDM_DRO] tangential cutter software dlantz@a... 2001-11-30 05:01:48 UTC RE: [CAD_CAM_EDM_DRO] Re: tangential cutter software David M. Munro 2001-11-30 06:03:36 UTC Re: [CAD_CAM_EDM_DRO] tangential cutter software p_uhd@f... 2001-11-30 06:55:28 UTC Re: tangential cutter p_uhd@f... 2001-11-30 06:56:09 UTC Re: tangential cutter ccs@m... 2001-11-30 07:07:20 UTC Re: [CAD_CAM_EDM_DRO] tangential cutter software ccs@m... 2001-11-30 07:26:21 UTC geckos was Re: tangential cutter mariss92705@y... 2001-11-30 10:34:41 UTC geckos was Re: tangential cutter Drew Rogge 2001-11-30 10:38:47 UTC Re: [CAD_CAM_EDM_DRO] geckos was Re: tangential cutter mariss92705@y... 2001-11-30 12:09:41 UTC geckos was Re: tangential cutter Dave Engvall 2001-11-30 16:31:22 UTC Re: [CAD_CAM_EDM_DRO] geckos was Re: tangential cutter Brian Walsh 2001-11-30 17:37:10 UTC Re: [CAD_CAM_EDM_DRO] geckos was Re: tangential cutter