Re: [CAD_CAM_EDM_DRO] Re: OK, I've got a detent encoder... What now?

For a detented encoder

http://www.cuistack.com/encoders/encd_tools.htm

RE45V2CR5 is 25 CPR with 100 detents 5V TTL

Or here's one allready built up

http://www.cuistack.com/encoders/encoders_pdf_paneloptic/encd_paneloptic_HC1
.pdf


Bill

> Marcus
>
> the encoder itself dosent need to cost all that much
> digikey has a few 25 cycle/rev (100 quadrature transitions/rev)

non-detented

> encoders that would do the job for around $30-40 ,all you would need to
> add is the detent knob (and code it in)
>
> Brian
>
> > But would it make you spend 3 times as much for your encoder on a

homebrew

> > rig?
> > Or would lack of availability of a 100 slot encoder make you leave that
> > feature off altogether?
> > A jog wheel is such a big improvement over a keyboard command for

setting

> > up, that I'd really miss it.
> > (one of the few things I found tedious with Flashcut)
> > Cheers
> >
> > Marcus
>