RE: [CAD_CAM_EDM_DRO] BDI
Posted by
John Guenther
on 2002-05-25 17:44:11 UTC
Gene.
The proper command to do this copy is
cp usr/local/emc/emc.ini /mnt/floppy/gcode/.
This should work, the basic format for the copy command is cp <from> <to>
HTH
John Guenther
Sterling, Virginia
The proper command to do this copy is
cp usr/local/emc/emc.ini /mnt/floppy/gcode/.
This should work, the basic format for the copy command is cp <from> <to>
HTH
John Guenther
Sterling, Virginia
> -----Original Message-----
> From: Gene [mailto:capper@...]
> Sent: Saturday, May 25, 2002 17:05
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] BDI
>
>
> I changed the cycle time var. and it works good again. I'm happy until
> the next disaster. I made a directory on the floppy called gcode, and
> then I tried to copy the ini file to floppy and here's what I got.
> #usr/local/emc/emc.ini/ cp /mnt/floppy/gcode
> and it says permission denied. I was logged in as root. Is it not
> possible To do this?
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this
> as a sister site to the CCED group, as many of the same members
> are there, for OT subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
Discussion Thread
Alan Marconett KM6VV
2001-07-16 18:31:14 UTC
BDI
allan_r9@h...
2001-07-16 19:28:46 UTC
Re: BDI
Alan Marconett KM6VV
2001-07-16 20:02:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: BDI
Tim Goldstein
2001-07-16 20:11:40 UTC
RE: [CAD_CAM_EDM_DRO] Re: BDI
Jon Elson
2001-07-16 22:15:08 UTC
Re: [CAD_CAM_EDM_DRO] BDI
Ian Wright
2001-07-17 01:39:25 UTC
Re: [CAD_CAM_EDM_DRO] BDI
Ray
2001-07-17 11:54:34 UTC
Re: BDI
Alan Marconett KM6VV
2001-07-17 12:20:50 UTC
Re: [CAD_CAM_EDM_DRO] BDI
Alan Marconett KM6VV
2001-07-17 13:23:42 UTC
Re: [CAD_CAM_EDM_DRO] BDI
Alan Marconett KM6VV
2001-07-17 14:18:26 UTC
Re: BDI
Alan Marconett KM6VV
2001-07-18 15:59:03 UTC
Re: BDI
emserv@e...
2001-08-09 16:00:16 UTC
BDI
Weyland
2001-08-09 19:47:04 UTC
BDI
Donald Brock
2001-08-10 08:57:19 UTC
Re: BDI
Gene
2002-02-27 00:28:10 UTC
BDI
awemawson
2002-02-27 00:33:19 UTC
Re: BDI
Gene
2002-02-27 05:00:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: BDI
Ed Fanta
2002-02-27 05:45:07 UTC
Re: [CAD_CAM_EDM_DRO] BDI
John Guenther
2002-02-27 05:45:45 UTC
RE: [CAD_CAM_EDM_DRO] Re: BDI
Jon Elson
2002-02-27 10:50:52 UTC
Re: [CAD_CAM_EDM_DRO] BDI
Gene
2002-02-27 12:44:51 UTC
BDI
Dave Lantz
2002-02-27 12:46:32 UTC
RE: [CAD_CAM_EDM_DRO] BDI
Gene
2002-02-27 14:15:59 UTC
Re: [CAD_CAM_EDM_DRO] BDI
Darrell Daniels
2002-02-27 22:12:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: BDI
Dave Lantz
2002-02-28 05:05:53 UTC
RE: [CAD_CAM_EDM_DRO] BDI
Glen
2002-02-28 10:24:52 UTC
Re: [CAD_CAM_EDM_DRO] BDI
Gene
2002-04-12 11:13:50 UTC
BDI
Ray Henry
2002-04-12 18:58:25 UTC
Re: BDI
batwings@i...
2002-04-12 19:17:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: BDI
Jon Elson
2002-04-12 22:52:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: BDI
Ray Henry
2002-04-13 12:12:02 UTC
Re: Re: Re: BDI
Gene
2002-05-06 19:54:31 UTC
BDI
Gene
2002-05-07 09:48:40 UTC
BDI
Ray Henry
2002-05-07 16:32:16 UTC
Re: BDI
John Branlund
2002-05-07 16:44:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: BDI
Tim Goldstein
2002-05-07 16:57:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: BDI
Ray Henry
2002-05-07 20:11:20 UTC
Re: BDI
Jon Elson
2002-05-07 22:17:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: BDI
Gene
2002-05-23 15:44:20 UTC
BDI
Jon Elson
2002-05-23 21:58:23 UTC
Re: [CAD_CAM_EDM_DRO] BDI
Ian W. Wright
2002-05-24 00:58:46 UTC
Re: [CAD_CAM_EDM_DRO] BDI
Ray Henry
2002-05-24 07:22:05 UTC
Re: BDI
Gene
2002-05-25 14:05:05 UTC
BDI
John Guenther
2002-05-25 17:44:11 UTC
RE: [CAD_CAM_EDM_DRO] BDI
William Scalione
2002-05-25 21:39:41 UTC
Re: [CAD_CAM_EDM_DRO] BDI
Jon Elson
2002-05-25 21:49:41 UTC
Re: [CAD_CAM_EDM_DRO] BDI
Ray Henry
2002-05-26 07:29:42 UTC
Re: Re: BDI
Gene
2002-05-27 14:04:00 UTC
BDI
Nic van der Walt
2002-05-27 17:46:17 UTC
Servo motor controller project
Jon Elson
2002-05-27 22:36:52 UTC
Re: [CAD_CAM_EDM_DRO] BDI
Vajk Fekete
2002-05-27 22:39:49 UTC
Re: [CAD_CAM_EDM_DRO] BDI
Nic van der Walt
2002-05-28 14:52:15 UTC
Servo motor controller project
studleylee
2002-05-28 15:27:36 UTC
Re: Servo motor controller project
Peter Homann
2002-05-28 16:37:46 UTC
HSM Tapping Machine Article
doug98105
2002-05-28 17:25:10 UTC
Re: HSM Tapping Machine Article
Peter Homann
2002-05-28 17:42:17 UTC
RE: [CAD_CAM_EDM_DRO] Re: HSM Tapping Machine Article
Keith Bowers
2002-05-28 17:52:50 UTC
Re: [CAD_CAM_EDM_DRO] Servo motor controller project
Marcus & Eva
2002-05-28 19:30:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: HSM Tapping Machine Article
Peter Homann
2002-05-28 19:53:26 UTC
RE: [CAD_CAM_EDM_DRO] Re: HSM Tapping Machine Article
chevalier121
2002-05-29 02:18:21 UTC
Re: Servo motor controller project
turbulatordude
2002-05-29 04:26:15 UTC
Re: HSM Tapping Machine Article
doug98105
2002-05-29 06:48:53 UTC
Re: HSM Tapping Machine Article
steel2chips
2002-05-30 07:42:41 UTC
Re: Servo motor controller project
Gene
2002-07-04 14:32:50 UTC
BDI
dakota8833
2002-07-05 05:30:59 UTC
Re: BDI
Ray Henry
2002-07-05 08:03:13 UTC
Re: BDI
Gene
2002-07-05 10:38:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: BDI
Jon Elson
2002-07-05 12:05:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: BDI