RE: [CAD_CAM_EDM_DRO] Re: HSM Tapping Machine Article
Posted by
Peter Homann
on 2002-05-28 19:53:26 UTC
Marcus,
Thanks for your reply. I guess the stepper is not Ideal. I want to tap a lot
of M3 (3mm) holes into either 4mm or 6mm thick aluminium. I would assume
that with a spiral (gun?) tap, I could tap it straight through if I has a
"floating Z head. The spindle would be primarily suppling the rotational
movement, the Z axis would not have to keep up with the Z movement due to
the floating head. The tap would "pull itself down as it taps.
This way, the stepper driving the spindle only has to rotate the tap enough
times to tap the hole then reverse it back out.
It's not ideal but I don't fancy getting RSI hand tapping the holes.
Cheers,
Peter Homann
<mailto:peter.homann@...>
Work : +61 3 8530-7755
Adacel Technologies Ltd Fax : +61 3 9596-2960
250 Bay St, Brighton 3186, VIC, AUSTRALIA Mobile : 0421 601665
http://www.adacel.com.au Australian Software Engineering Excellence
Thanks for your reply. I guess the stepper is not Ideal. I want to tap a lot
of M3 (3mm) holes into either 4mm or 6mm thick aluminium. I would assume
that with a spiral (gun?) tap, I could tap it straight through if I has a
"floating Z head. The spindle would be primarily suppling the rotational
movement, the Z axis would not have to keep up with the Z movement due to
the floating head. The tap would "pull itself down as it taps.
This way, the stepper driving the spindle only has to rotate the tap enough
times to tap the hole then reverse it back out.
It's not ideal but I don't fancy getting RSI hand tapping the holes.
Cheers,
Peter Homann
<mailto:peter.homann@...>
Work : +61 3 8530-7755
Adacel Technologies Ltd Fax : +61 3 9596-2960
250 Bay St, Brighton 3186, VIC, AUSTRALIA Mobile : 0421 601665
http://www.adacel.com.au Australian Software Engineering Excellence
> -----Original Message-----
> From: Marcus & Eva [mailto:implmex@...]
> Sent: Wednesday, 29 May 2002 12:36 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: Re: [CAD_CAM_EDM_DRO] Re: HSM Tapping Machine Article
>
>
> Hi Peter:
> I'd be worried about losing steps on the spindle or the Z axis.
> I'd also miss not being able to run the spindle up to decent speeds.
> (Steppers are not good at going fast).
> Cheers
>
> Marcus
>
> ----- Original Message -----
> From: "Peter Homann" <peter.homann@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Tuesday, May 28, 2002 5:42 PM
> Subject: RE: [CAD_CAM_EDM_DRO] Re: HSM Tapping Machine Article
>
>
> > Hi Doug,
> >
> > My original idea way to drive the spindle with a 4th axis
> stepper motor.
> >
> > How do I build an axial tension and compression device. :-)
> >
> > Thanks,
>
> >
> >
> >
> > Peter Homann
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com
> to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider
> this as a sister site to the CCED group, as many of the same
> members are there, for OT subjects, that are not allowed on
> the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@...
> [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
Discussion Thread
Alan Marconett KM6VV
2001-07-16 18:31:14 UTC
BDI
allan_r9@h...
2001-07-16 19:28:46 UTC
Re: BDI
Alan Marconett KM6VV
2001-07-16 20:02:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: BDI
Tim Goldstein
2001-07-16 20:11:40 UTC
RE: [CAD_CAM_EDM_DRO] Re: BDI
Jon Elson
2001-07-16 22:15:08 UTC
Re: [CAD_CAM_EDM_DRO] BDI
Ian Wright
2001-07-17 01:39:25 UTC
Re: [CAD_CAM_EDM_DRO] BDI
Ray
2001-07-17 11:54:34 UTC
Re: BDI
Alan Marconett KM6VV
2001-07-17 12:20:50 UTC
Re: [CAD_CAM_EDM_DRO] BDI
Alan Marconett KM6VV
2001-07-17 13:23:42 UTC
Re: [CAD_CAM_EDM_DRO] BDI
Alan Marconett KM6VV
2001-07-17 14:18:26 UTC
Re: BDI
Alan Marconett KM6VV
2001-07-18 15:59:03 UTC
Re: BDI
emserv@e...
2001-08-09 16:00:16 UTC
BDI
Weyland
2001-08-09 19:47:04 UTC
BDI
Donald Brock
2001-08-10 08:57:19 UTC
Re: BDI
Gene
2002-02-27 00:28:10 UTC
BDI
awemawson
2002-02-27 00:33:19 UTC
Re: BDI
Gene
2002-02-27 05:00:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: BDI
Ed Fanta
2002-02-27 05:45:07 UTC
Re: [CAD_CAM_EDM_DRO] BDI
John Guenther
2002-02-27 05:45:45 UTC
RE: [CAD_CAM_EDM_DRO] Re: BDI
Jon Elson
2002-02-27 10:50:52 UTC
Re: [CAD_CAM_EDM_DRO] BDI
Gene
2002-02-27 12:44:51 UTC
BDI
Dave Lantz
2002-02-27 12:46:32 UTC
RE: [CAD_CAM_EDM_DRO] BDI
Gene
2002-02-27 14:15:59 UTC
Re: [CAD_CAM_EDM_DRO] BDI
Darrell Daniels
2002-02-27 22:12:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: BDI
Dave Lantz
2002-02-28 05:05:53 UTC
RE: [CAD_CAM_EDM_DRO] BDI
Glen
2002-02-28 10:24:52 UTC
Re: [CAD_CAM_EDM_DRO] BDI
Gene
2002-04-12 11:13:50 UTC
BDI
Ray Henry
2002-04-12 18:58:25 UTC
Re: BDI
batwings@i...
2002-04-12 19:17:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: BDI
Jon Elson
2002-04-12 22:52:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: BDI
Ray Henry
2002-04-13 12:12:02 UTC
Re: Re: Re: BDI
Gene
2002-05-06 19:54:31 UTC
BDI
Gene
2002-05-07 09:48:40 UTC
BDI
Ray Henry
2002-05-07 16:32:16 UTC
Re: BDI
John Branlund
2002-05-07 16:44:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: BDI
Tim Goldstein
2002-05-07 16:57:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: BDI
Ray Henry
2002-05-07 20:11:20 UTC
Re: BDI
Jon Elson
2002-05-07 22:17:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: BDI
Gene
2002-05-23 15:44:20 UTC
BDI
Jon Elson
2002-05-23 21:58:23 UTC
Re: [CAD_CAM_EDM_DRO] BDI
Ian W. Wright
2002-05-24 00:58:46 UTC
Re: [CAD_CAM_EDM_DRO] BDI
Ray Henry
2002-05-24 07:22:05 UTC
Re: BDI
Gene
2002-05-25 14:05:05 UTC
BDI
John Guenther
2002-05-25 17:44:11 UTC
RE: [CAD_CAM_EDM_DRO] BDI
William Scalione
2002-05-25 21:39:41 UTC
Re: [CAD_CAM_EDM_DRO] BDI
Jon Elson
2002-05-25 21:49:41 UTC
Re: [CAD_CAM_EDM_DRO] BDI
Ray Henry
2002-05-26 07:29:42 UTC
Re: Re: BDI
Gene
2002-05-27 14:04:00 UTC
BDI
Nic van der Walt
2002-05-27 17:46:17 UTC
Servo motor controller project
Jon Elson
2002-05-27 22:36:52 UTC
Re: [CAD_CAM_EDM_DRO] BDI
Vajk Fekete
2002-05-27 22:39:49 UTC
Re: [CAD_CAM_EDM_DRO] BDI
Nic van der Walt
2002-05-28 14:52:15 UTC
Servo motor controller project
studleylee
2002-05-28 15:27:36 UTC
Re: Servo motor controller project
Peter Homann
2002-05-28 16:37:46 UTC
HSM Tapping Machine Article
doug98105
2002-05-28 17:25:10 UTC
Re: HSM Tapping Machine Article
Peter Homann
2002-05-28 17:42:17 UTC
RE: [CAD_CAM_EDM_DRO] Re: HSM Tapping Machine Article
Keith Bowers
2002-05-28 17:52:50 UTC
Re: [CAD_CAM_EDM_DRO] Servo motor controller project
Marcus & Eva
2002-05-28 19:30:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: HSM Tapping Machine Article
Peter Homann
2002-05-28 19:53:26 UTC
RE: [CAD_CAM_EDM_DRO] Re: HSM Tapping Machine Article
chevalier121
2002-05-29 02:18:21 UTC
Re: Servo motor controller project
turbulatordude
2002-05-29 04:26:15 UTC
Re: HSM Tapping Machine Article
doug98105
2002-05-29 06:48:53 UTC
Re: HSM Tapping Machine Article
steel2chips
2002-05-30 07:42:41 UTC
Re: Servo motor controller project
Gene
2002-07-04 14:32:50 UTC
BDI
dakota8833
2002-07-05 05:30:59 UTC
Re: BDI
Ray Henry
2002-07-05 08:03:13 UTC
Re: BDI
Gene
2002-07-05 10:38:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: BDI
Jon Elson
2002-07-05 12:05:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: BDI