Re: [CAD_CAM_EDM_DRO] Power supplies
Posted by
illya
on 2002-05-29 19:32:56 UTC
Hi Paul
This may help as well
Illya
http://www.esctechsite.com/cases/power.htm
Pinouts of ATX Power connectors
Pin voltage Color Pin voltage Color
1 +3.3Vdc Orange 11 +3.3Vdc Orange
2 +3.3 Vdc Orange 12 -12 Vdc Blue
3 GND Black 13 GND Black
4 +5 Vdc Red 14 PS-ON Green
5 GND Black 15 GND Black
6 +5 Vdc Red 16 GND Black
7 GND Black 17 GND Black
8 PwrOK Gray 18 -5 Vdc White
9 +5Vstandby Purple 19 +5 Vdc Red
10 +12 Vdc Yellow 20 +5 Vdc Red
This may help as well
Illya
http://www.esctechsite.com/cases/power.htm
Pinouts of ATX Power connectors
Pin voltage Color Pin voltage Color
1 +3.3Vdc Orange 11 +3.3Vdc Orange
2 +3.3 Vdc Orange 12 -12 Vdc Blue
3 GND Black 13 GND Black
4 +5 Vdc Red 14 PS-ON Green
5 GND Black 15 GND Black
6 +5 Vdc Red 16 GND Black
7 GND Black 17 GND Black
8 PwrOK Gray 18 -5 Vdc White
9 +5Vstandby Purple 19 +5 Vdc Red
10 +12 Vdc Yellow 20 +5 Vdc Red
----- Original Message -----
From: "galt1x" <Galt1x@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, May 30, 2002 11:31 AM
Subject: [CAD_CAM_EDM_DRO] Power supplies
>
>
> I have a Sparkle Power Company FSP 250-60 GTV power supply, could
> someone tell me which wires to jumper so I can use this as a stand
> alone supply which will turn on when I plug it in not needing the
> mother board.
>
> Paul E. Killoy
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
Discussion Thread
galt1x
2002-05-29 19:01:31 UTC
Power supplies
illya
2002-05-29 19:18:24 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
illya
2002-05-29 19:32:56 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
illya
2002-05-29 19:45:31 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
galt1x
2002-05-30 01:15:45 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
illya
2002-05-30 01:30:29 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
P. J. Hicks
2002-12-21 10:29:20 UTC
Power supplies
Tim Goldstein
2002-12-21 10:59:54 UTC
RE: [CAD_CAM_EDM_DRO] Power supplies
Alan Marconett KM6VV
2002-12-21 11:16:33 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
Robert Campbell
2002-12-21 11:19:46 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
turbulatordude <davemucha@j...
2002-12-21 11:34:47 UTC
Re: Power supplies
Ron Kline
2002-12-21 18:30:29 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
Todd Fleming
2002-12-21 18:45:45 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
Ron Kline
2002-12-21 19:06:41 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
Todd Fleming
2002-12-21 19:10:22 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
turbulatordude <davemucha@j...
2002-12-21 19:29:20 UTC
Re: Power supplies
Carol & Jerry Jankura
2002-12-21 19:53:02 UTC
RE: [CAD_CAM_EDM_DRO] Power supplies
Todd Fleming
2002-12-21 19:58:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power supplies
Paul Amaranth
2002-12-21 20:00:06 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
Hoyt McKagen
2002-12-21 22:05:53 UTC
RE: [CAD_CAM_EDM_DRO] Power supplies
Chris L
2002-12-21 22:50:15 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
turbulatordude <davemucha@j...
2002-12-22 09:07:33 UTC
Re: Power supplies ( blown Gecko)
JanRwl@A...
2002-12-22 16:59:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power supplies ( blown Gecko)
turbulatordude <davemucha@j...
2002-12-23 05:29:37 UTC
Re: Power supplies ( blown Gecko)
mmeyers1111
2003-07-27 21:54:40 UTC
Power supplies
Jon Elson
2003-07-27 22:23:11 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
turbulatordude
2003-07-28 06:56:04 UTC
Re: Power supplies
dougfennell2000
2003-07-28 13:43:52 UTC
Re: Power supplies
Dan Mauch
2003-07-28 16:33:54 UTC
RE: [CAD_CAM_EDM_DRO] Re: Power supplies
Robert Campbell
2003-07-28 17:56:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power supplies
mmeyers1111
2003-07-28 17:57:39 UTC
Re: Power supplies
Doug Fortune
2003-07-28 18:59:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power supplies
Tim Goldstein
2003-07-28 20:29:38 UTC
RE: [CAD_CAM_EDM_DRO] Re: Power supplies
dougfennell2000
2003-07-28 20:31:56 UTC
Re: Power supplies
dougfennell2000
2003-07-28 20:32:12 UTC
Re: Power supplies
Robert Campbell
2003-07-28 20:32:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power supplies
dougfennell2000
2003-07-28 20:33:15 UTC
Re: Power supplies
mmeyers1111
2003-07-29 00:06:45 UTC
Re: Power supplies
dougfennell2000
2003-07-29 07:12:56 UTC
Re: Power supplies
fortino
2003-07-29 07:39:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power supplies
mmeyers1111
2003-07-29 14:55:25 UTC
Re: Power supplies
wvickery2003
2005-02-21 09:18:05 UTC
Power supplies
braidmeister
2005-02-21 09:33:12 UTC
Re: Power supplies
turbulatordude
2005-02-21 09:44:18 UTC
Re: Power supplies
Dan Mauch
2005-02-21 09:58:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power supplies
wvickery2003
2005-02-21 10:02:22 UTC
Re: Power supplies
turbulatordude
2005-02-21 10:18:59 UTC
Re: Power supplies
turbulatordude
2005-02-21 11:01:56 UTC
Re: Power supplies