Re: [CAD_CAM_EDM_DRO] Power supplies

If you have a computer swap in the area, old PC cases make dandy
project cases. Also check schools if they're doing a hardware
refresh. Lots of times, old systems are just landfilled.

I have a stack of old 286 systems on hand for just that purpose.

Paul

On Sat, Dec 21, 2002 at 10:53:58PM -0800, Carol & Jerry Jankura wrote:
> My supply is housed in a box made of 1/2 inch thick MDF board. Slots are
> routed out for air flow and the area of the 'panel' for switches, binding
> posts, and fuses is thinned down from the inside. Painted a hammertone grey,
> it looks pretty decent and did not cost an arm + leg.
> Hope this helps.
>
> -- Jerry
>
> > In building my power supply by far the biggest hassel was finding
> > a suitable
> > enclosure. What are others out there using or where are you
> > finding suitable
> > enclosures?
> > PJH
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>

--
Paul Amaranth, GCIH | Rochester MI, USA
Aurora Group, Inc. | Security, Systems & Software
paul@... | Unix & Windows