CAD CAM EDM DRO - Yahoo Group Archive

Re: Power supplies

Posted by dougfennell2000
on 2003-07-28 20:33:15 UTC
Your absolutely right - I left off a zero. Thanx.--- In
CAD_CAM_EDM_DRO@yahoogroups.com, Doug Fortune <pentam@c...> wrote:
> dougfennell2000 wrote:
> >
> > Recipe for a power supply:
> > .
> > .
> > 1 - 80v 2200mfd cap
> > .
> > .
>
> Way too small, and that voltage (and capacity) doesn't give
> you any headroom for back-EMF surges.
>
> Begin instead at a minimum of 100V peak and 22,000uF to do
> justice to the Geckos.
>
> Doug Fortune
> http://www.cncKITS.com
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> .

Discussion Thread

galt1x 2002-05-29 19:01:31 UTC Power supplies illya 2002-05-29 19:18:24 UTC Re: [CAD_CAM_EDM_DRO] Power supplies illya 2002-05-29 19:32:56 UTC Re: [CAD_CAM_EDM_DRO] Power supplies illya 2002-05-29 19:45:31 UTC Re: [CAD_CAM_EDM_DRO] Power supplies galt1x 2002-05-30 01:15:45 UTC Re: [CAD_CAM_EDM_DRO] Power supplies illya 2002-05-30 01:30:29 UTC Re: [CAD_CAM_EDM_DRO] Power supplies P. J. Hicks 2002-12-21 10:29:20 UTC Power supplies Tim Goldstein 2002-12-21 10:59:54 UTC RE: [CAD_CAM_EDM_DRO] Power supplies Alan Marconett KM6VV 2002-12-21 11:16:33 UTC Re: [CAD_CAM_EDM_DRO] Power supplies Robert Campbell 2002-12-21 11:19:46 UTC Re: [CAD_CAM_EDM_DRO] Power supplies turbulatordude <davemucha@j... 2002-12-21 11:34:47 UTC Re: Power supplies Ron Kline 2002-12-21 18:30:29 UTC Re: [CAD_CAM_EDM_DRO] Power supplies Todd Fleming 2002-12-21 18:45:45 UTC Re: [CAD_CAM_EDM_DRO] Power supplies Ron Kline 2002-12-21 19:06:41 UTC Re: [CAD_CAM_EDM_DRO] Power supplies Todd Fleming 2002-12-21 19:10:22 UTC Re: [CAD_CAM_EDM_DRO] Power supplies turbulatordude <davemucha@j... 2002-12-21 19:29:20 UTC Re: Power supplies Carol & Jerry Jankura 2002-12-21 19:53:02 UTC RE: [CAD_CAM_EDM_DRO] Power supplies Todd Fleming 2002-12-21 19:58:18 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supplies Paul Amaranth 2002-12-21 20:00:06 UTC Re: [CAD_CAM_EDM_DRO] Power supplies Hoyt McKagen 2002-12-21 22:05:53 UTC RE: [CAD_CAM_EDM_DRO] Power supplies Chris L 2002-12-21 22:50:15 UTC Re: [CAD_CAM_EDM_DRO] Power supplies turbulatordude <davemucha@j... 2002-12-22 09:07:33 UTC Re: Power supplies ( blown Gecko) JanRwl@A... 2002-12-22 16:59:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supplies ( blown Gecko) turbulatordude <davemucha@j... 2002-12-23 05:29:37 UTC Re: Power supplies ( blown Gecko) mmeyers1111 2003-07-27 21:54:40 UTC Power supplies Jon Elson 2003-07-27 22:23:11 UTC Re: [CAD_CAM_EDM_DRO] Power supplies turbulatordude 2003-07-28 06:56:04 UTC Re: Power supplies dougfennell2000 2003-07-28 13:43:52 UTC Re: Power supplies Dan Mauch 2003-07-28 16:33:54 UTC RE: [CAD_CAM_EDM_DRO] Re: Power supplies Robert Campbell 2003-07-28 17:56:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supplies mmeyers1111 2003-07-28 17:57:39 UTC Re: Power supplies Doug Fortune 2003-07-28 18:59:58 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supplies Tim Goldstein 2003-07-28 20:29:38 UTC RE: [CAD_CAM_EDM_DRO] Re: Power supplies dougfennell2000 2003-07-28 20:31:56 UTC Re: Power supplies dougfennell2000 2003-07-28 20:32:12 UTC Re: Power supplies Robert Campbell 2003-07-28 20:32:34 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supplies dougfennell2000 2003-07-28 20:33:15 UTC Re: Power supplies mmeyers1111 2003-07-29 00:06:45 UTC Re: Power supplies dougfennell2000 2003-07-29 07:12:56 UTC Re: Power supplies fortino 2003-07-29 07:39:58 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supplies mmeyers1111 2003-07-29 14:55:25 UTC Re: Power supplies wvickery2003 2005-02-21 09:18:05 UTC Power supplies braidmeister 2005-02-21 09:33:12 UTC Re: Power supplies turbulatordude 2005-02-21 09:44:18 UTC Re: Power supplies Dan Mauch 2005-02-21 09:58:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supplies wvickery2003 2005-02-21 10:02:22 UTC Re: Power supplies turbulatordude 2005-02-21 10:18:59 UTC Re: Power supplies turbulatordude 2005-02-21 11:01:56 UTC Re: Power supplies