CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Power supplies

Posted by Hoyt McKagen
on 2002-12-21 22:05:53 UTC
I put all my electronics in an old Pioneer Stereo case, which even had the
right size well and mounting points for the power transformer. I mounted
the driver card heat sinks (non-finned) directly onto the original finned
heat sink for the output stages. The rest of the electronics simply bolted
down onto chassis over spacers of rgt hgt.


At 10:53 PM 12/21/02 -0800, you wrote:
>My supply is housed in a box made of 1/2 inch thick MDF board. Slots are
>routed out for air flow and the area of the 'panel' for switches, binding
>posts, and fuses is thinned down from the inside. Painted a hammertone grey,
>it looks pretty decent and did not cost an arm + leg.
>Hope this helps.
>
>-- Jerry
>
>> In building my power supply by far the biggest hassel was finding
>> a suitable
>> enclosure. What are others out there using or where are you
>> finding suitable
>> enclosures?
>> PJH
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for
OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>

Regards, Hoyt McKagen


Anti-virus request: Please do not add this email addy to address books
Belfab CNC - http://www.freeyellow.com/members/belfab/belfab.html
US Best MC - http://www.freeyellow.com/members/batwings/best.html
Camping/Caving - http://www.freeyellow.com/members/batwings/caving.html
Let's drop the big one on Iraq, and finish the job with Windex.

Discussion Thread

galt1x 2002-05-29 19:01:31 UTC Power supplies illya 2002-05-29 19:18:24 UTC Re: [CAD_CAM_EDM_DRO] Power supplies illya 2002-05-29 19:32:56 UTC Re: [CAD_CAM_EDM_DRO] Power supplies illya 2002-05-29 19:45:31 UTC Re: [CAD_CAM_EDM_DRO] Power supplies galt1x 2002-05-30 01:15:45 UTC Re: [CAD_CAM_EDM_DRO] Power supplies illya 2002-05-30 01:30:29 UTC Re: [CAD_CAM_EDM_DRO] Power supplies P. J. Hicks 2002-12-21 10:29:20 UTC Power supplies Tim Goldstein 2002-12-21 10:59:54 UTC RE: [CAD_CAM_EDM_DRO] Power supplies Alan Marconett KM6VV 2002-12-21 11:16:33 UTC Re: [CAD_CAM_EDM_DRO] Power supplies Robert Campbell 2002-12-21 11:19:46 UTC Re: [CAD_CAM_EDM_DRO] Power supplies turbulatordude <davemucha@j... 2002-12-21 11:34:47 UTC Re: Power supplies Ron Kline 2002-12-21 18:30:29 UTC Re: [CAD_CAM_EDM_DRO] Power supplies Todd Fleming 2002-12-21 18:45:45 UTC Re: [CAD_CAM_EDM_DRO] Power supplies Ron Kline 2002-12-21 19:06:41 UTC Re: [CAD_CAM_EDM_DRO] Power supplies Todd Fleming 2002-12-21 19:10:22 UTC Re: [CAD_CAM_EDM_DRO] Power supplies turbulatordude <davemucha@j... 2002-12-21 19:29:20 UTC Re: Power supplies Carol & Jerry Jankura 2002-12-21 19:53:02 UTC RE: [CAD_CAM_EDM_DRO] Power supplies Todd Fleming 2002-12-21 19:58:18 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supplies Paul Amaranth 2002-12-21 20:00:06 UTC Re: [CAD_CAM_EDM_DRO] Power supplies Hoyt McKagen 2002-12-21 22:05:53 UTC RE: [CAD_CAM_EDM_DRO] Power supplies Chris L 2002-12-21 22:50:15 UTC Re: [CAD_CAM_EDM_DRO] Power supplies turbulatordude <davemucha@j... 2002-12-22 09:07:33 UTC Re: Power supplies ( blown Gecko) JanRwl@A... 2002-12-22 16:59:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supplies ( blown Gecko) turbulatordude <davemucha@j... 2002-12-23 05:29:37 UTC Re: Power supplies ( blown Gecko) mmeyers1111 2003-07-27 21:54:40 UTC Power supplies Jon Elson 2003-07-27 22:23:11 UTC Re: [CAD_CAM_EDM_DRO] Power supplies turbulatordude 2003-07-28 06:56:04 UTC Re: Power supplies dougfennell2000 2003-07-28 13:43:52 UTC Re: Power supplies Dan Mauch 2003-07-28 16:33:54 UTC RE: [CAD_CAM_EDM_DRO] Re: Power supplies Robert Campbell 2003-07-28 17:56:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supplies mmeyers1111 2003-07-28 17:57:39 UTC Re: Power supplies Doug Fortune 2003-07-28 18:59:58 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supplies Tim Goldstein 2003-07-28 20:29:38 UTC RE: [CAD_CAM_EDM_DRO] Re: Power supplies dougfennell2000 2003-07-28 20:31:56 UTC Re: Power supplies dougfennell2000 2003-07-28 20:32:12 UTC Re: Power supplies Robert Campbell 2003-07-28 20:32:34 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supplies dougfennell2000 2003-07-28 20:33:15 UTC Re: Power supplies mmeyers1111 2003-07-29 00:06:45 UTC Re: Power supplies dougfennell2000 2003-07-29 07:12:56 UTC Re: Power supplies fortino 2003-07-29 07:39:58 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supplies mmeyers1111 2003-07-29 14:55:25 UTC Re: Power supplies wvickery2003 2005-02-21 09:18:05 UTC Power supplies braidmeister 2005-02-21 09:33:12 UTC Re: Power supplies turbulatordude 2005-02-21 09:44:18 UTC Re: Power supplies Dan Mauch 2005-02-21 09:58:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supplies wvickery2003 2005-02-21 10:02:22 UTC Re: Power supplies turbulatordude 2005-02-21 10:18:59 UTC Re: Power supplies turbulatordude 2005-02-21 11:01:56 UTC Re: Power supplies