Re: [CAD_CAM_EDM_DRO] Power supplies
Posted by
illya
on 2002-05-30 01:30:29 UTC
It seems to be a standard on atx power supplies
Illya
Illya
----- Original Message -----
From: "galt1x" <Galt1x@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, May 30, 2002 5:43 PM
Subject: Re: [CAD_CAM_EDM_DRO] Power supplies
> That worked, thanks. I wonder if those are the "official" wires?
>
>
> Paul E. Killoy
> ----- Original Message -----
> From: "illya" <illya@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Wednesday, May 29, 2002 7:45 PM
> Subject: Re: [CAD_CAM_EDM_DRO] Power supplies
>
>
> > Hi paul
> > I tried jumpering pin 14 PS-ON Green wire & pin15 GND Black
wire
> > It seems to work I get the 5 & 12 volts from the drive connectors
> >
> > Illya
> >
> >
> > ----- Original Message -----
> > From: "galt1x" <Galt1x@...>
> > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > Sent: Thursday, May 30, 2002 11:31 AM
> > Subject: [CAD_CAM_EDM_DRO] Power supplies
> >
> >
> > >
> > >
> > > I have a Sparkle Power Company FSP 250-60 GTV power supply, could
> > > someone tell me which wires to jumper so I can use this as a stand
> > > alone supply which will turn on when I plug it in not needing the
> > > mother board.
> > >
> > > Paul E. Killoy
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if
> > you have trouble.
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider this as a
> > sister site to the CCED group, as many of the same members are there,
for
> OT
> > subjects, that are not allowed on the CCED list.
> > >
> > >
> > >
> > > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > > Moderator: jmelson@... timg@... [Moderator]
> > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > bill,
> > > List Mom
> > > List Owner
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
> > >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this as a
> sister site to the CCED group, as many of the same members are there, for
OT
> subjects, that are not allowed on the CCED list.
> >
> >
> >
> > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
Discussion Thread
galt1x
2002-05-29 19:01:31 UTC
Power supplies
illya
2002-05-29 19:18:24 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
illya
2002-05-29 19:32:56 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
illya
2002-05-29 19:45:31 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
galt1x
2002-05-30 01:15:45 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
illya
2002-05-30 01:30:29 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
P. J. Hicks
2002-12-21 10:29:20 UTC
Power supplies
Tim Goldstein
2002-12-21 10:59:54 UTC
RE: [CAD_CAM_EDM_DRO] Power supplies
Alan Marconett KM6VV
2002-12-21 11:16:33 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
Robert Campbell
2002-12-21 11:19:46 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
turbulatordude <davemucha@j...
2002-12-21 11:34:47 UTC
Re: Power supplies
Ron Kline
2002-12-21 18:30:29 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
Todd Fleming
2002-12-21 18:45:45 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
Ron Kline
2002-12-21 19:06:41 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
Todd Fleming
2002-12-21 19:10:22 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
turbulatordude <davemucha@j...
2002-12-21 19:29:20 UTC
Re: Power supplies
Carol & Jerry Jankura
2002-12-21 19:53:02 UTC
RE: [CAD_CAM_EDM_DRO] Power supplies
Todd Fleming
2002-12-21 19:58:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power supplies
Paul Amaranth
2002-12-21 20:00:06 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
Hoyt McKagen
2002-12-21 22:05:53 UTC
RE: [CAD_CAM_EDM_DRO] Power supplies
Chris L
2002-12-21 22:50:15 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
turbulatordude <davemucha@j...
2002-12-22 09:07:33 UTC
Re: Power supplies ( blown Gecko)
JanRwl@A...
2002-12-22 16:59:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power supplies ( blown Gecko)
turbulatordude <davemucha@j...
2002-12-23 05:29:37 UTC
Re: Power supplies ( blown Gecko)
mmeyers1111
2003-07-27 21:54:40 UTC
Power supplies
Jon Elson
2003-07-27 22:23:11 UTC
Re: [CAD_CAM_EDM_DRO] Power supplies
turbulatordude
2003-07-28 06:56:04 UTC
Re: Power supplies
dougfennell2000
2003-07-28 13:43:52 UTC
Re: Power supplies
Dan Mauch
2003-07-28 16:33:54 UTC
RE: [CAD_CAM_EDM_DRO] Re: Power supplies
Robert Campbell
2003-07-28 17:56:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power supplies
mmeyers1111
2003-07-28 17:57:39 UTC
Re: Power supplies
Doug Fortune
2003-07-28 18:59:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power supplies
Tim Goldstein
2003-07-28 20:29:38 UTC
RE: [CAD_CAM_EDM_DRO] Re: Power supplies
dougfennell2000
2003-07-28 20:31:56 UTC
Re: Power supplies
dougfennell2000
2003-07-28 20:32:12 UTC
Re: Power supplies
Robert Campbell
2003-07-28 20:32:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power supplies
dougfennell2000
2003-07-28 20:33:15 UTC
Re: Power supplies
mmeyers1111
2003-07-29 00:06:45 UTC
Re: Power supplies
dougfennell2000
2003-07-29 07:12:56 UTC
Re: Power supplies
fortino
2003-07-29 07:39:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power supplies
mmeyers1111
2003-07-29 14:55:25 UTC
Re: Power supplies
wvickery2003
2005-02-21 09:18:05 UTC
Power supplies
braidmeister
2005-02-21 09:33:12 UTC
Re: Power supplies
turbulatordude
2005-02-21 09:44:18 UTC
Re: Power supplies
Dan Mauch
2005-02-21 09:58:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power supplies
wvickery2003
2005-02-21 10:02:22 UTC
Re: Power supplies
turbulatordude
2005-02-21 10:18:59 UTC
Re: Power supplies
turbulatordude
2005-02-21 11:01:56 UTC
Re: Power supplies