Re: [CAD_CAM_EDM_DRO] Re: What cnc setup to buy for my sherline mill?

Probably true. but have you used the latest release of TurboCNC, it is MUCH
smoother between lines. My milling is generally thousands of tiny steps,
and with the new software it really is amazingly better. So much so, that I
had to re-program all of my feedrates because I started snapping off
cutters. I am not sure I need any more constant velocity contouring
functionality.

Daniel J. Statman, Statman Designs
www.statmandesigns.com
dan.statman@...

----- Original Message -----
From: "Tim Goldstein" <timg@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, October 12, 2002 1:57 AM
Subject: RE: [CAD_CAM_EDM_DRO] Re: What cnc setup to buy for my sherline
mill?


> Dan,
>
> He will be machining wood if I remember correctly. So something that
> does not stop on each G-code line would probably work better I think.
> TurboCNC would be a good get your feet wet and if it is not smooth
> enough there would be no real lose when switching to another controller
> like Master5 or Mach1.
>
> Tim
> [Denver, CO]
>
>