CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Home cnc project

Posted by James Cullins
on 2002-11-21 17:21:48 UTC
How much do you sell them for?
Jim Cullins
jcullins@...
----- Original Message -----
From: "Tim Goldstein" <timg@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, November 21, 2002 2:16 PM
Subject: Re: [CAD_CAM_EDM_DRO] Home cnc project


> Good question, but afraid I don't know. What I can tell you is that the
> headstock uses 2 bearings total. One at each end of the spindle. The 2
> bearings are identical. They are about 2" or so OD and about 3/4" ID (just
> from memory, so this could be way off). They are preloaded by the spindle.
> They are too narrow to be tapered rollers based on the roller bearings I
> have seen.
>
> Hope that helps a little? My guess is they are standard or deep groove
ball
> bearing cartridge units.
>
> Tim
> Denver, CO]
> Sherline Products at Deep Discount (Mach1 CNC controller too)
> www.KTMarketing.com/Sherline
>
> ----- Original Message -----
> > Tim:
> >
> > Can you please tell us, what kind of bearings in a Sherline headstock,
> > "angular contact", separate radial and thrust, tapered roller, etc???
> Left
> > end of spindle?
> >
> > Thanks!
> >
> > Jan Rowland
> > FAQ: http://www.ktmarketing.com/faq.html
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Discussion Thread

wjbzone 2002-11-21 08:11:21 UTC Home cnc project deanc500 2002-11-21 08:34:18 UTC Re: Home cnc project Marv Frankel 2002-11-21 09:12:01 UTC Re: [CAD_CAM_EDM_DRO] Home cnc project Marv Frankel 2002-11-21 09:35:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Home cnc project Tim Goldstein 2002-11-21 09:37:51 UTC Re: [CAD_CAM_EDM_DRO] Home cnc project JanRwl@A... 2002-11-21 11:32:54 UTC Re: [CAD_CAM_EDM_DRO] Home cnc project JanRwl@A... 2002-11-21 11:38:30 UTC Re: [CAD_CAM_EDM_DRO] Home cnc project Gene 2002-11-21 11:58:30 UTC Re: [CAD_CAM_EDM_DRO] Home cnc project Tim Goldstein 2002-11-21 12:23:11 UTC Re: [CAD_CAM_EDM_DRO] Home cnc project Tim Goldstein 2002-11-21 13:59:54 UTC Re: [CAD_CAM_EDM_DRO] Home cnc project JanRwl@A... 2002-11-21 15:04:11 UTC Re: [CAD_CAM_EDM_DRO] Home cnc project James Cullins 2002-11-21 17:21:48 UTC Re: [CAD_CAM_EDM_DRO] Home cnc project wjbzone 2002-11-22 04:12:27 UTC Re: Home cnc project wjbzone 2002-11-22 04:13:02 UTC Re: Home cnc project wjbzone 2002-11-22 04:24:40 UTC Re: Home cnc project wjbzone 2002-11-22 04:37:48 UTC Re: Home cnc project Marv Frankel 2002-11-22 05:08:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Home cnc project Tim Goldstein 2002-11-22 09:33:09 UTC Re: [CAD_CAM_EDM_DRO] Re: Home cnc project jagco1998 2002-11-22 16:04:48 UTC Re: Home cnc project Brian 2002-12-01 19:36:46 UTC Re: [CAD_CAM_EDM_DRO] Home cnc project